DX-500R Accessory and I/O Configuration Reference Guide (Website) STANDARD ACCESSORIES FTKIT 1700-0014 Air Hose Fitting TSD800-6 Power Adapter 7045-9020 Foot Switch OPTIONAL ACCESSORIES DX-ECABLE BLACK WHITE ENCODER B+ MOTOR + ENCODER A+ MOTOR - GND ENCODER A+ GND +5VDC +5VDC ENCODER B+ BACK VIEW OF CABLE (FRONT VIEW FROM CONTROLLER) SPARE PARTS Part Number Description 2900-0015 LCD, 20 x 4 with Back Light 7049-9010 PCBA, DX-500 TSD500-30 Pressure Regulator, 0-100 psi TSD650-21 Solenoid Valve 535 Coupler, Panel mount TSD1121-23 Knob, Pressure Regulator TSD1135-26 6 Pin Din Socket I/O Configuration and End of Cycle Switch Upon completion of a dispense cycle, an open collector circuit closes and remains closed until the next dispense cycle. This circuit can be used to signal back to a host computer, start another device in sequence, or drive any other operations that need to be tied to the completion of the dispense cycle. Upon closure, (end of dispense cycle), power from an external source is allowed to pass through the circuit to operate a 5 to 24 VDC load. Power consumption must not exceed 250 mA. The load could be a relay, solenoid, counter, LED, or any device that will operate within a 5 to 24 VDC range and a maximum of 250 mA.