MTX Virtual Series SCOPEin BOX digital recorder-analyser oscilloscopes MTX 162 digital oscilloscope MTX 1032 differential probes MTX 1050 spectrum analyser MTX 162 MTX 1052 MTX 1054 MTX 1032-B & MTX 1032-C MTX 1050 SCOPEin BOX oscilloscopes with FFT analysis, harmonic analysers and recorders - 2 channels (MTX 1052) or 4 channels (MTX 1054) / 150 MHz / Vertical sensitivity 250 V 100 V/div - Advanced trigger modes and SPO analysis MTX 162 low-cost oscilloscope - 2 channels / 60 MHz - Normal or analogue-type remanent display MTX 1032 differential probes for measuring signals not referenced to earth - Input voltage 600 V and 600 Vrms in common mode - Attenuation 1/10 and 1/100 - Bandwidth 50 MHz / BNC (MTX 1032-C) or 30 MHz/banana (MTX 1032-B) MTX 1050 spectrum analyser (400 kHz to 1 GHz) - Ideal for EMC prequalification tests with built-in FM demodulatorSCOPEin BOX Virtual Oscilloscopes Ergonomics and PC environment The MTX-1052-PC, MTX 1054-PC and MTX 162 are genuineoscilloscopes in a bo. Compact, lightweight and stackable, these measurement instruments can be connected directly to a PC via a USB or Ethernet interface with PC software. Users benefit from all the PC s advantages in terms of storage capacity and display capabilities (minimum resolution 1024x768), allowing much more precise analysis of curves. The functions are directly accessible from the menus and theWindow toolbar, via keyboard shortcuts or by using the mouse. Users control the oscilloscope with theinstrumen control panel, which contains all the standard commands for oscilloscopes. Online help is also available SCOPEin BOX control panel . SCOPEin BOX display ofX(t . MTX 162 General commands traces in SPO mode Display of traces Multi-windowing means you can simultaneously display the traces, the zoom, the FFT analysis, the measurements, etc. In this way, users can choose among multiple combinations so that they have all the useful information available at a glance. The MTX 1052 & MTX 1054 are both equipped with the SPO (Smart Persistence Oscilloscope) display mode. The MTX 162, adouble time-bas oscilloscope, offers normal or remanent display (like on an analogue oscilloscope). Functions Each of these models offers functions which are rare on this type of instrument: real-time FFT analyser (lin/log), recorder or dedicated ROLL mode simplifying adjustments (MTX 162), bandwidth limiters, simultaneous automatic measurements with markers and cursors, etc. To simplify use of the instrument, the MTX 162 includes vertical and horizontal Autorange functions. The MTX 1052 & MTX 1054 also offer extensive advanced triggering possibilities. Universal communication Each oscilloscope is equipped with a universal USB commu- nication mode and a 10 Mb Ethernet interface for integration . SCOPEin BOX: in a local or remote network. simultaneous display ofX(t,X andFF When started up in USB or Ethernet mode, the software automatically detects the instruments connected to the PC or network.Unlimite storage of the traces is possible simply by saving the files. Firmware upgrades are automatic. 1 or 2 clicks are all it takes to export the results into Excel or print them out in Word. With theWeb serve available on the MTX 1052 & MTX 1054, you can control the instruments remotely without extra software and exchange files via FTP very simply. The MTX 162 is equipped with WiFi communication TheWeb serve: remote control without extra software