Page 1/6 Data sheet P/N M12 Jack X-coded IP67, field assembly MMF881A315 EAN 4250184171089 2017-26-10 Illustrations Dimensional drawing Wiring See enlarged drawings at the end of document Product specification 8-pole M12 jack for field assembly Cat.6 per IEC/PAS 61076-2-109 A suitable for 10 GBit as per IEEE 802.3an AWG 26/1-22/1, AWG 26/7-22/7 can be connected solid copper wire diameter 0.4 to 0.64 mm stranded copper wire diameter 0.48 to 0.76 mm wire diameter with isolation up to 1.6 mm overall cable diameter from 5.0 to 9.7 mm jack consists of only two parts easy assembly without special tools industry-compatible zinc die-cast housing suitable for applications in the railway industry Page 2/6 Data sheet M12 Jack X-coded IP67, field assembly P/N MMF881A315 EAN 4250184171089 2017-26-10 Technical Data General Data Design Jack Shielding shielded Transmission technology Copper Dimensions Dimension (L x W x H) 49.00 x 16.80 x 16.80 mm Dimension (L x W x H) 1.929 x 0.661 x 0.661 in. Field assembly ability yes Labeling option on housing Transmission characteristics Category (ISO) 6 A Category (TIA) 6A Transmission rate up to 10 GBit IEEE 802.3an Connections/interfaces Connector technology interface 1 IDC-connection Connector technology interface 2 M12-jack Number of ports interface 2 1 Number of ports interface 2 equipped 1 Number of positions/contacts interface 1 8 Number of positions/contacts interface 2 8 Termination data, solid wire (min. - max.) Conductor cross section, solid wire AWG 26/1 - 22/1 Conductor cross section, solid wire 0.128 - 0.324 mm Conductor diameter, solid wire (bare copper) 0.409 - 0.643 mm Conductor diameter, solid wire (bare copper) 0.016 - 0.025 in. Termination data, stranded wire (min. - max.) Conductor cross section, stranded wire AWG 26/7 - 22/7 Conductor cross section, stranded wire 0.141 - 0.355 mm Conductor diameter, stranded wire (bare copper) 0.483 - 0.762 mm Conductor diameter, stranded wire (bare copper) 0.019 - 0.030 in.