MG Super Glue, Liquid 8333 Technical Data Sheet 8333 Description The 8333 Super Glue, Liquid is a quick curing, solventless, medium viscosity cyanoacrylate adhesive. Applications & Usages Its primary application is to bond parts together without the need for heat or pressure. This adhesive is well suited to bond rubber to rubber, plastic to plastic, rubber to metal, and plastic to metal applications. This adhesive is not intended as a structural adhesive to join load bearing structures. Benefits and Features Mil-Spec-46050C: Adhesive Type II, Class 2 ENVIRONMENT Bonds a wide variety of substrates RoHS REACH compliant Handling time of only 10 seconds Strong chemical resistance Usage Parameters Temperature Ranges Properties Value Properties Value a) Typical Handling Time 10 s Constant Service Temp. -55 to 80 C a) Service Cure 22 C 72 F >24 h -67 to 176 F Cure Type Humidity Storage Temperature 5 to 22 C Shelf Life 3 y of Unmixed Parts 41 to 72 F a) Assumes 50% relative humidity. The fixture and cure time depend on the humidity, the type of material being bonded, bond gap, and temperature. Principal Components Name CAS Number Ethyl-2-cyanoacrylate 7085-85-0 Page 1 of 5 Date: 10 July 2018 / Ver. 1.02 MG Super Glue, Liquid 8333 Technical Data Sheet 8333 Properties of Cured 8333 Physical Properties Method Value Color Visual Clear 3 Density 25 C 79 C 1.05 g/cm b) Lap Shear Strength ISO 4587 2 2 Lap Shear Strength (Stainless Steel) <20 s fixture time >14.5 N/mm >2 100 lb/in 2 2 Lap Shear Strength (Aluminum) <15 s fixture time >12.1 N/mm >1 750 lb/in 2 2 Lap Shear Strength (ABS) <10 s fixture time >6.2 N/mm >900 lb/in 2 2 Lap Shear Strength (PVC) <5 s fixture time >6.2 N/mm >900 lb/in 2 2 Lap Shear Strength (Polycarbonate) <30 s fixture time >6.2 N/mm >900 lb/in 2 2 Lap Shear Strength (Phenolic Rubber) <10 s fixture time >6.2 N/mm >900 lb/in 2 2 Lap Shear Strength (Neoprene) <5 s fixture time >5.2 N/mm >750 lb/in 2 2 Butt Joints Tensile Strength (Stainless Steel) ISO 6922 >12.4 N/mm >1 800 lb/in Electric Properties Method Value 15 Volume Resistivity ASTM D 257 2 10 cm Dielectric Dissipation & Constant dissipation, D constant, k Dissipation & Constant 1 kHz ASTM D 150-98 0.02 2 to 3.5 Note: Specifications are for sample cured at 50% relative humidity for at least 24 hours. 2 2 a) N/mm = MPa lb/in = psi 2 b) The fixture time is the time required to develop a shear strength of 0.1 N/mm . This corresponds to the strength at which the parts may no longer be moved independently. Storage Store between 5 to 22 C 41 and 72 F in dry area away from sunlight. Page 2 of 5 Date: 10 July 2018 / Ver. 1.02