MR003-008.1 Microbot

Name: Ambient Light Sensor - TEMT6000 Code: MR003-008.1 This ambient light sensor carries the TEMT6000 phototransistor. The phototransistor is connected to a pull-down resistor to form a voltage divider that produces an analog voltage output between 0V and +5V as a function of the light detected in the visible spectrum. Lower output voltage is an indication of less light detected. The LED current-limiting resistor is set to deliver approximately 20mA. The current requirement can be met by some microcontroller I/O lines, allowing the sensor to be powered up and down through an I/O line to conserve power. CONNECTIONS OUT Analog output GND Ground VCC Supply power (+5V) Tab.1 Connections SPECIFICATIONS Supply voltage +5V Supply current 0.5mA Operating temperature -40 / +85C Interface Analog Dimensions 0.35 x 0.35 (8.9 x 8.9 mm) Weight 0.01 oz (0.3 g) Tab.2 - Specifications 1 MICROBOT di Prosseda Mirko Strada Chiesuola 117, 04010 Borgo Carso (LT), Italy web: X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Environmental Sensors category: Click to view products by Microbot manufacturer: Other Similar products are found below : OKY3077 SEN0043 DFR0198 FIT0227 KIT0021 SEN0097 SEN0147 SEN0170 SEN0190 SEN0206 SEN0212 SEN0219 SEN0220 SEN0227 SEN0228 SEN0231 SEN0137 SEN0114 SEN0132 SEN0183 2857 1356 1782 2651 2652 2748 2899 DFR0022 DFR0023 DFR0024 DFR0026 DFR0033 DFR0067 SEN0101 SEN0244 SEN0248 SEN0249 SEN0257 SEN0263 SEN0121 SEN0127 SEN0128 SEN0129 SEN0130 SEN0131 SEN0133 SEN0134 SEN0159 SEN0161 SEN0165