WWW.Microsemi .COM 1N4728AG-1N4764AG,e3 1N4728AG thru 1N4764AG, e3 (Glass) Silicon 1 Watt Zener Diodes SCOTTSDALE DIVISION DESCRIPTION APPEARANCE The popular 1N4728AG thru 1N4764AG glass body series of 1.0 watt DO-41 or Zeners provides voltage regulation in a selection from 3.3 to 100 volts in DO-204AL 5% tolerances with other tighter tolerances also available as identified by different suffix letters on the part number. These glass encapsulated (Glass) Zeners with a G suffix provide hermetic-sealed qualities and higher rated temperature when required beyond that optionally provided in the same size DO-41 plastic-body (P suffix) for these JEDEC part numbers. Both of these package options are available by Microsemi including RoHS Compliant devices with an e3 suffix. A variety of other Zener product offerings and packages are available by Microsemi to meet higher and lower power or test current applications. IMPORTANT: For the most current data, consult MICROSEMIs website: WWW.Microsemi .COM 1N4728AG-1N4764AG,e3 1N4728AG thru 1N4764AG, e3 (Glass) Silicon 1 Watt Zener Diodes SCOTTSDALE DIVISION ELECTRICAL CHARACTERISTICS* ZENER TEST MAXIMUM MAXIMUM TEST MAXIMUM MAXIMUM TEST MAXIMUM VOLTAGE CURRENT DYNAMIC REVERSE VOLTAGE REGULATOR KNEE CURRENT (SURGE) JEDEC (Note 4) IMPEDANCE CURRENT CURRENT IMPEDANCE CURRENT TYPE o (Note 2) (Note 2) (Note 3) T = 50 C A NUMBER (Vz) (I ) (Z I ) (I V ) (V ) (Z I ) (I ) (I ) ZT ZT ZT R R R ZK ZK ZK S (I ) ZM (Note 1) VOLTS mA OHMS A VOLTS mA OHMS mA mA 1N4728A 3.3 76 10 100 1 276 400 1.0 1380 1N4729A 3.6 69 10 100 1 252 400 1.0 1260 1N4730A 3.9 64 9 50 1 234 400 1.0 1190 1N4731A 4.3 58 9 10 1 217 400 1.0 1070 1N4732A 4.7 53 8 10 1 193 500 1.0 970 1N4733A 5.1 49 7 10 1 178 550 1.0 890 1N4734A 5.6 45 5 10 2 162 600 1.0 810 1N4735A 6.2 41 2 10 3 146 700 1.0 730 1N4736A 6.8 37 3.5 10 4 133 700 1.0 660 1N4737A 7.5 34 4.0 10 5 121 700 0.5 605 1N4738A 8.2 31 4.5 10 6 110 700 0.5 550 1N4739A 9.1 28 5.0 10 7 100 700 0.5 500 1N4740A 10 25 7 10 7.6 91 700 0.25 454 1N4741A 11 23 8 5 8.4 83 700 0.25 414 1N4742A 12 21 9 5 9.1 76 700 0.25 380 1N4743A 13 19 10 5 9.9 69 700 0.25 344 1N4744A 15 17 14 5 11.4 61 700 0.25 304 1N4745A 16 15.5 16 5 12.2 57 700 0.25 285 1N4746A 18 14 20 5 13.7 50 750 0.25 250 1N4747A 20 12.5 22 5 15.2 45 750 0.25 225 1N4748A 22 11.5 23 5 16.7 41 750 0.25 205 1N4749A 24 10.5 25 5 18.2 38 750 0.25 190 1N4750A 27 9.5 35 5 20.6 34 750 0.25 170 1N4751A 30 8.5 40 5 22.8 30 1000 0.25 150 1N4752A 33 7.5 45 5 25.1 27 1000 0.25 135 1N4753A 36 7.0 50 5 27.4 25 1000 0.25 125 1N4754A 39 6.5 60 5 29.7 23 1000 0.25 115 1N4755A 43 6.0 70 5 32.7 22 1500 0.25 110 1N4756A 47 5.5 80 5 35.8 19 1500 0.25 95 1N4757A 51 5.0 95 5 38.8 18 1500 0.25 90 1N4758A 56 4.5 110 5 42.6 16 2000 0.25 80 1N4759A 62 4.0 125 5 47.1 14 2000 0.25 70 1N4760A 68 3.7 150 5 51.7 13 2000 0.25 65 1N4761A 75 3.3 175 5 56.0 12 2000 0.25 60 1N4762A 82 3.0 200 5 62.2 11 3000 0.25 55 1N4763A 91 2.8 250 5 69.2 10 3000 0.25 50 1N4764A 100 2.5 350 5 76.0 9 3000 0.25 45 *JEDEC Registered Data NOTES: 1. The JEDEC type numbers shown with an A suffix have a 5% tolerance on nominal zener voltage. No suffix signifies a 10% tolerance, C signifies 2%, and D signifies 1% tolerance. Also add a G suffix for designating glass construction (P suffix designates plastic body options described by separate data sheet).. 2. The Zener impedance is derived from the 60 Hz ac voltage that results when an ac current having an rms value equal to 10% of the dc Zener current (I or I ) is superimposed on I or I . Zener impedance is measured at two points to ensure a sharp knee on the ZT ZK ZT ZK breakdown curve and eliminate unstable units. See MicroNote 202 for zener impedance variation with different operating currents. o 3. The reverse surge current is measured at 25 C ambient using a square wave or equivalent sine wave pulse 1/120 second duration superimposed on I . ZT 4. Zener voltage (V ) is measured at T = 25C (+8, -2C) and 90 seconds after application of dc current. Z L Copyright 2005 Microsemi Page 2 10-18-2005 REV C Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503