24AA32AFT-I/SN Microchip

24AA32AF/24LC32AF 2 32K I C Serial EEPROM with Quarter-Array Write-Protect Device Selection Table Description: Part VCC Max. Clock Temp. The Microchip Technology Inc. 24AA32AF/24LC32AF Number Range Frequency Ranges (24XX32AF*) is a 32 Kbit Electrically Erasable PROM. The device is organized as a single block of 4K x 8-bit (1) 24AA32AF 1.7-5.5 400 kHz I memory with a 2-wire serial interface. Low-voltage 24LC32AF 2.5-5.5 400 kHz I, E design permits operation down to 1.7V, with standby Note 1: 100 kHz for VCC <2.5V. and read currents of only 1 A and 400 A, respectively. It has been developed for advanced, low- power applications such as personal communications Features: or data acquisition. The 24XX32AF also has a page Single Supply with Operation down to 1.7V for write capability for up to 32 bytes of data. Functional 24AA32AF devices, 2.5V for 24LC32AF devices address lines allow up to eight devices on the same bus, for up to 256 Kbits address space. The 24XX32AF Low-Power CMOS Technology: is available in the standard 8-pin PDIP, surface mount - Read current 400 A, max. SOIC, TSSOP, TDFN and MSOP packages. The - Standby current 1 A, max. (I-temp) 24XX32AF is also available in the 5-lead SOT-23 2 2-Wire Serial Interface, I C Compatible package. Packages with 3 Address Pins are Cascadable up Block Diagram to Eight Devices Schmitt Trigger Inputs for Noise Suppression A0 A1 A2 WP HV Generator Output Slope Control to Eliminate Ground Bounce 100 kHz and 400 kHz Clock Compatibility Page Write Time 5 ms max. I/O Memory EEPROM Control XDEC Control Self-Timed Erase/Write Cycle Array Logic Logic 32-Byte Page Write Buffer Page Latches Hardware Write-Protect for 1/4 Array (C00h-FFFh) I/O SCL ESD Protection > 4,000V YDEC More than 1 Million Erase/Write Cycles SDA Data Retention > 200 Years Vcc Factory Programming Available Sense Amp. VSS Packages Include 8-lead PDIP, SOIC, TSSOP, R/W Control MSOP, TDFN and 5-lead SOT-23 Pb-Free and RoHS Compliant Temperature Ranges: - Industrial (I): -40C to +85C - Automotive (E): -40C to +125C Package Types PDIP, MSOP, SOIC, TSSOP SOT-23 TDFN A0 1 8 VCC SCL WP 1 5 A0 1 8 VCC 2 7 WP A1 2 7 WP A1 VSS 2 SCL 3 6 A2 A2 3 6 SCL VSS 4 5 34 VCC SDA SDA VSS 4 5 SDA *24XX32AF is used in this document as a generic part number for the 24AA32AF/24LC32AF devices. 2009 Microchip Technology Inc. DS22184A-page 124AA32AF/24LC32AF 1.0 ELECTRICAL CHARACTERISTICS () Absolute Maximum Ratings VCC.............................................................................................................................................................................6.5V All inputs and outputs w.r.t. VSS ......................................................................................................... -0.3V to VCC +1.0V Storage temperature ...............................................................................................................................-65C to +150C Ambient temperature with power applied................................................................................................-40C to +125C ESD protection on all pins ...................................................................................................................................................... 4 kV NOTICE: Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only and functional operation of the device at those or any other conditions above those indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability. TABLE 1-1: DC CHARACTERISTICS Industrial (I): TA = -40C to +85C, VCC = +1.7V to +5.5V DC CHARACTERISTICS Automotive (E): TA = -40C to +125C, VCC = +2.5V to +5.5V Param. Symbol Characteristic Min. Typ. Max. Units Conditions No. D1 A0, A1, A2, WP, SCL and SDA pins D2 VIH High-level input voltage 0.7 VCC V D3 VIL Low-level input voltage 0.3 VCC V VCC 2.5V 0.2 VCC V VCC < 2.5V D4 VHYS Hysteresis of Schmitt 0.05 VCC V VCC 2.5V (Note 1) Trigger inputs (SDA, SCL pins) D5 VOL Low-level output voltage 0.40 V IOL = 3.0 mA, VCC = 4.5V IOL = 2.1 mA, Vcc = 2.5V D6 ILI Input leakage current 1 AVIN = VSS or VCC D7 ILO Output leakage current 1 AVOUT = VSS or VCC D8 CIN, Pin capacitance 10 pFVCC = 5.0V (Note 1) COUT (all inputs/outputs) TA = 25C, FCLK = 1 MHz D9 ICC write Operating current 0.1 3 mAVCC = 5.5V, SCL = 400 kHz D10 ICC read 0.05 400 A CCS Standby current 0.01 1 A Industrial D11 I 5 A Automotive SDA = SCL = VCC = 5.5V A0, A1, A2, WP = VSS Note 1: This parameter is periodically sampled and not 100% tested. 2: Typical measurements taken at room temperature. DS22184A-page 2 2009 Microchip Technology Inc.