WWW.Microsemi .COM
704-15K36 & 704-15K36T
704-15K36 and 704-15K36T
TRANSIENT
VOLTAGE SUPPRESSOR
SCOTTSDALE DIVISION
DESCRIPTION APPEARANCE
These two modularized unidirectional TVS products are primarily used in avionics
or other demanding applications for transient voltage protection. They meet all
applicable environmental requirements of MIL-PRF-19500 and may be used for
both commercial and military applications. The controlling specification for these
devices is MIL-STD-704 (Characteristics and Utilization of Aircraft Electric Power)
where these 15 kW assemblies are designed typically to operate with a low
source impedance of 0.25 Ohms for transients to protect equipment from induced
lightning, power surges, and transients originating from inductive switching or
power interrupt. The subassembly components can also be tested or screened
for military requirements prior to encapsulation into the complete module. The
screening would consist of 100% TX level environmental testing per MIL-PRF-
19500/500 (Par. 4.3). For ordering these options, use the following suffix:
H1 Submodule Screening
7 704-15K367 704-15K36T
H2 Submodule and Module Screening
H3 Submodule and Module Screening
& Module Group B & C lot testing
IMPORTANT: For the most current data, consult MICROSEMIs website: WWW.Microsemi .COM
704-15K36 / 704-15K36T
704-15K36 and 704-15K36T
TRANSIENT
VOLTAGE SUPPRESSOR
SCOTTSDALE DIVISION
GRAPHS
FIGURE 1
Peak Pulse Power vs. Pulse Time
FIGURE 2
Pulse Waveform
Copyright 2007
Microsemi
Page 2
10-16-2007 REV B
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503