Atmel Digital Temperature Sensors Evaluation Kit Atmel AT30TK175 Starter Kit Hardware User Guide Features Contents Four digital temperature sensor devices: One Atmel AT30TK175 adapter board Atmel AT30TSE002B One Atmel AT88Microbase AVR base module Atmel AT30TS75 6-inch USB cable Atmel AT30TS750 18-inch extension cable Atmel AT30TSE758 Four event LEDs Four alarm status LEDs: Critical, high, low, and normal Software switchable V : 3.3V, 5.0V, and OFF CC Power LED Introduction This starter kit utilizes the Atmel AT30TK175 adapter board to allow users to experiment and develop with the Atmel AT30TSE002B, AT30TS75, AT30TS750, and AT30TSE758 digital temperature sensors. The AT30TK175 daughterboard interfaces with the Atmel AT88Microbase board (included in the kit) to provide communication to a PC via a USB interface, allowing designers to learn and experiment with the temperature sensor demonstration utility. In addition, this kit supports a modular approach, enabling the AT30TK175 daughterboard to connect directly to an Atmel STK series AVR development platform to easily add temperature monitoring capabilities to applications. Figure 1. Atmel AT30TK175 adapter board Power LED Digital temperature sensor and the associated EVENT/ALERT LED Alarm status LEDs 8745ADTS5/11 1. Atmel AT30TK175STK Starter Kit The AT30TK175 is sold with the AT88Microbase to form the Atmel AT30TK175STK starter kit. For additional information on the AT88Microbase, see the Atmel AT88Microbase Hardware User Guide. Figure 1-1. The Atmel AT30TK175 daughterboard with the Atmel AT88Microbase module 2. Board Configuration Table 2-1. Seven-bit device address Atmel Atmel Atmel Atmel Device AT30TSE002B AT30TS75 AT30TS750 AT30TSE758 Temperature sensor address 0x1B 0x48 0x49 0x4A Serial EEPROM address 0x53 - - 0x52 2.2. 10-pin Interface Header 2 Table 2-1. I C pins: SCL, SD Pins 10 9 8 7 6 5 4 3 2 1 Signal VCC GND CRIT VCC NORM VCC HIGH LOW SDA SCL LED SEL LED EN LED LED Atmel AT30TK175 Starter Kit Hardware User Guide 2 8745ADTS5/11