AT30TS74 9- to 12-bit Selectable, 1.0C Accurate Digital Temperature Sensor DATASHEET Features Single 1.7V to 5.5V Supply Measures Temperature From -55 C to +125C Highly Accurate Temperature Measurements Requiring No External Components 1.0C Accuracy (Typical) Over the -20C to +100 C Range 1.0C Accuracy (Typical) Over the -10C to +100 C Range (WLCSP Only) 2.0C Accuracy (Typical) Over the -40C to +125 C Range User-configurable Resolution 9 to 12 bits (0.5 C to 0.0625 C) User-configurable High and Low Temperature Limits ALERT Output Pin for Indicating Temperature Alarms 2 2-Wire I C and SMBus Compatible Serial Interface Supports SMBus Timeout Supports SMBus Alert and Alert Response Address (ARA) Selectable Addressing Allows Up to Eight Devices on the Same Bus 2 I C High-Speed (HS) Mode Compatible 3.4MHz Maximum Clock Frequency Built-in noise Suppression Filtering for Clock and Data Input Signals Low-power Dissipation 85A Active Current (Typical) During Temperature Measurements Shutdown Mode to Minimize Power Consumption 1A Shutdown Current (Typical) One-Shot Mode for Single Temperature Measurement While in Shutdown Mode Pin and Software Compatible to Industry-standard LM75-type Devices Industry Standard Green (Pb/Halide-free/RoHS Compliant) Package Options 8-lead SOIC (150mil) 8-lead MSOP (3.0 x 3.0mm) 8-pad Ultra Thin DFN (UDFN 2.0 x 3.0 x 0.6mm) 4-ball WLCSP 5-ball WLCSP Atmel-Advance Information-DTS-AT30TS74-Datasheet 022017Description The AT30TS74 is a complete, precise temperature monitoring device designed for use in a variety of applications which require the measuring of local temperatures as an integral part of the system s function and/or reliability. The AT30TS74 device combines a high-precision digital temperature sensor, programmable 2 high and low temperature alarms, and a 2-Wire I C and SMBus (System Management Bus) compatible serial interface into a single compact package. The temperature sensor can measure temperatures over the full -55C to +125 C temperature range and has a maximum accuracy of 2.0 C from -20 C to +100C. The result of the digitized temperature measurements are stored in one of the AT30TS74 internal registers, which is readable at any time through the device s serial interface. The AT30TS74 utilizes flexible, user-programmable internal registers to configure the temperature sensor s performance and response to high and low temperature conditions. A dedicated alarm output activates if the temperature measurement exceeds the user-defined temperature and fault count limits. To reduce current consumption and save power, the AT30TS74 features a Shutdown mode which turns off all internal circuitry except for the internal Power-On Reset (POR) and serial interface circuits. The AT30TS74 is factory-calibrated and requires no external components to measure temperature. With its flexibility and high-degree of accuracy, the AT30TS74 is ideal for extended temperature measurements in a wide variety of communication, computer, consumer, environmental, industrial, and instrumentation applications. 2 AT30TS74 DATASHEET Atmel-Advance Information-DTS-AT30TS74-Datasheet 022017