ATA663203/ATA663231/ATA663254 LIN Bus Device Family including Voltage Regulator and (1) LIN SBC with Compatible Footprint DATASHEET Features Supply voltage up to 40V Operating voltage V = 5V to 28V S Supply current Sleep mode: typically 9A Silent mode: typically 47A Very low current consumption at low supply voltages (2V < V < 5.5V): S typically 130A Linear low-drop voltage regulator, 85mA current capability: MLC (multi-layer ceramic) capacitor with 0 ESR Normal, fail-safe, and silent mode Atmel ATA663254: V = 5.0V 2% CC Atmel ATA663231: V = 3.3V 2% CC Sleep mode: VCC is switched off Active mode Atmel ATA663203: V = 5.0V 2% CC VCC undervoltage detection with open drain reset output (NRES, 4ms reset time) Voltage regulator is short-circuit and over-temperature protected LIN physical layer according to LIN 2.0, 2.1, 2.2, 2.2A and SAEJ2602-2 Wake-up capability via LIN bus (100s dominant) Wake-up source recognition TXD time-out timer Bus pin is over-temperature and short-circuit protected versus GND and battery Advanced EMC and ESD performance Fulfills the OEM Hardware Requirements for LIN in Automotive Applications Rev.1.3 Interference and damage protection according to ISO7637 Qualified according to AEC-Q100 Packages: DFN8 (all types) with wettable flanks (Moisture Sensitivity Level 1) SO8 (only Atmel ATA663254) Note: 1. LIN SBC: LIN system basis chip including LIN transceiver and voltage regulator. 9337F-AUTO-02/161. Description The Atmel ATA6632xx device family includes two basic products a LIN system basis chip (SBC) and a low-drop voltage regulator with compatible footprints. The Atmel ATA663231/54 (system basis chip) is a fully integrated LIN transceiver, designed according to the LIN specification 2.0, 2.1, 2.2, 2.2A and SAEJ2602-2, with a low-drop voltage regulator (3.3V/5V/85mA). The combination of voltage regulator and bus transceiver makes it possible to develop simple but powerful slave nodes in LIN bus systems. Atmel ATA663231/54 is designed to handle the low-speed data communication in vehicles (for example, in convenience electronics). Improved slope control at the LIN driver ensures secure data communication up to 20Kbaud. The bus output is designed to withstand high voltage. Sleep mode and silent mode guarantee minimized current consumption even in the case of a floating or a short-circuited LIN bus. The Atmel ATA663203 (voltage regulator) is a fully integrated low-drop voltage regulator, with 5V output voltage and 85mA current capability. It is especially designed for the automotive environment. A key feature is that the current consumption is always below 170A (without load), even if the supply voltage is below the regulators nominal output voltage. Table 1-1. ATA6632xx Device Family Description Atmel ATA6632xx LIN-SBC with 3.3V regulator 31 LIN-SBC with 5V regulator 54 Voltage regulator 5V 03 Figure 1-1. Block Diagram LIN Transceiver with Integrated Voltage Regulator (SBC) 7 VS Atmel ATA663231/54 V CC Normal and Receiver Fail-safe Mode - RXD 1 + 6 LIN RF-filter V CC Wake-up bus timer Short-circuit and overtemperature protection Slew rate control TXD 4 TXD Time-out timer 8 VCC Voltage regulator Sleep EN 3 2 NRES V mode CC Control Normal/Silent/ VCC unit Fail-safe Mode switched 3.3V/5V GND 5 off Undervoltage reset 2 ATA663203/ATA663231/ATA663254 DATASHEET 9337FAUTO02/16