mXT112UD-MAUHA1 1.0 maXTouch 112-node Touchscreen Controller Product Brief Description The mXT112UD-MAUHA1 1.0 uses a unique charge-transfer acquisition engine to implement Microchips patented capacitive sensing method. Coupled with a state-of-the-art CPU, the entire touchscreen sensing solution can measure, classify and track a number of individual finger touches with a high degree of accuracy in the shortest response time. The mXT112UD-MAUHA1 1.0 allows for both mutual and self capacitance measurements, with the self capacitance measurements being used to augment the mutual capacitance measurements to produce reliable touch information. Functional Safety Front Panel Material and Design UL/IEC 60730 Class B support Works with PET or glass, including curved profiles (configuration and stack-up to be approved by Self diagnostics at power-on and as periodic tests Microchip or a Microchip-qualified touch sensor during operation module partner) Heartbeat (alive) signal output to host 10 mm glass (or 5 mm PMMA) with bare finger Safety manual available (dependent on screen size, touch size, configuration and stack-up) maXTouch Adaptive Sensing Touchscreen 6 mm glass (or 3 mm PMMA) with multi-finger 5 mm Technology glove (2.7 mm PMMA equivalent) (dependent on Up to 14 X (transmit) lines and 24 Y (receive) lines for screen size, touch size, configuration and stack-up) use by a touchscreen Support for non-rectangular sensor designs (for A maximum of 112 nodes can be allocated to the example, circular, rounded or with cutouts) touch sensor Touchscreen size of 4.47 inches (2:1 aspect ratio), Touch Performance assuming a sensor electrode pitch of 6.5 mm. Other Moisture/Water Compensation sizes are possible with different electrode pitches and - No false touch with condensation or water drop appropriate sensor material up to 22 mm diameter Multiple touch support with up to 10 concurrent - One-finger tracking with condensation or water touches tracked in real time drop up to 22 mm diameter Touch Sensor Technology Mutual capacitance and self capacitance measurements supported for robust touch detection Discrete/out-cell support including glass and PET film- P2P mutual capacitance measurements supported for based sensors extra sensitive multi-touch sensing On-cell/touch-on display support including TFT, LCD Noise suppression technology to combat ambient, (ITPS, IPS) and OLED charger, and power-line noise Synchronization with display refresh timing capability - Up to 240 V between 1 Hz and 1 kHz sinusoidal PP Support for standard (for example, Diamond) and waveform proprietary sensor patterns (review of designs by - Up to 20 V between 1 kHz and 1 MHz PP Microchip or a Microchip-qualified touch sensor sinusoidal waveform module partner is recommended) Burst Frequency - Controlled Tx burst frequency drift over process and temperature range 2020 Microchip Technology Inc. Product Brief DS40002274A-page 1 MXT112UD-MAUHA1 1.0 Scan Speed - Typical report rate for 10 touches 70 Hz (subject to configuration) - Initial touch latency <18 ms for first touch from idle (subject to configuration) - Configurable to allow for power and speed optimization Enhanced Algorithms Lens bending algorithms to remove display noise Touch suppression algorithms to remove unintentional large touches, such as palm Palm Recovery Algorithm for quick restoration to normal state Power Saving Programmable timeout for automatic transition from Active to Idle state Pipelined analog sensing detection and digital processing to optimize system power efficiency Application Interfaces 2 I C interface with support for Standard mode (up to 100 kHz), Fast mode (up to 400 kHz), Fast-mode Plus (up to 1 MHz) Interrupt to indicate when a message is available Additional SPI Debug Interface to read the raw data for tuning and debugging purposes Power Supply Digital (Vdd) 3.3V nominal Digital I/O (VddIO) 3.3V nominal Analog (AVdd) 3.3V nominal High voltage internal X line drive (XVdd) 6.6V with internal voltage pump (XVdd connected to AVdd if voltage pump not used) Package 56-pin XQFN 6 6 0.4 mm, 0.35 mm pitch Operating Temperature 40 C to +85C Design Services Review of device configuration, stack-up and sensor patterns Custom firmware versions can be considered DS40002274A-page 2 Product Brief 2020 Microchip Technology Inc.