Atmel AVR UC3C 32-bit Flash Microcontrollers Industrial and Automotive Control Atmel AVR UC3C 32-bit Flash microcontrollers are designed for industrial and automotive control applications, including fast communication and motor control. The devices feature single or dual CAN interfaces, Full Speed USB with OTG, NAND Flash and SDRAM interface, PWM with dead-time insertion, 1.5 Msps 12-bit ADC with 8 channels and dual sample-and-hold circuit for synchronized sampling of 2 signals, and 1.5 Msps 12-bit analog DAC with dual outputs. Designed with a multi-layered databus, 68KB on-chip SRAM with triple high-speed interfaces, and multi-channel peripheral and memory-to-memory DMA controller, the AVR UC3C offers outstanding data throughput. The AVR UC3C Event System provides a connection between on-chip peripherals to off-load the CPU, save power consumption and provide a 100% deterministic response to external and internal events. The AVR UC3 delivers high computational throughput, deterministic real-time control, low power, low system cost, high reliability and ease of use. The CPU includes cutting-edge features such as DSP arithmetic, single-cycle multiply and accumulate instructions and single-cycle SRAM access. In addition, a peripheral DMA controller and multi-layer high-speed bus architecture make the UC3 core ideal for high throughput applications. Key Features Advantages Example Applications 64-512KB Flash High data throughput Industrial control 68KB SRAM (2 x 32kB + 4kB) High computing efficiency HVAC including DSP instructions Event System Home appliances Industry-best low power Single/Dual CAN interface Automotive consumption Full Speed USB device + OTG Excellent real-time performance SRAM/SDRAM controller Product Status Free application source code NAND Flash controller All part numbers are in mass pro- 8 ch 12-bit ADC, 1.5 Msps with duction and samples are available dual sample-and-hold Sales Collateral 2 ch 12-bit DAC, 1.5 Msps AVR UC3 Sales Introduction PWM with dead-time insertion AVR UC3 Technical Introduction Memory-to-memory DMA AVR UC3 C Introduction High number of serial Application Notes communication modules Datasheet 144, 100 and 64-pin package options Available in QFP, QFN, and BGA package optionsAtmel AVR UC3C 32-bit Flash Microcontrollers Industrial and Automotive Control Development Tools Suggested Resale Price Kit P/N Ordering Code 10KU ATUC3C-EK Evaluation kit AT32UC3C064C-ALUT 4.86 AT32UC3C0128C-ALUT 5.87 AT32UC3C0256C-ALUT 7.21 AVR ONE / Debuggers AT32UC3C0512C-ALUT 8.51 JTAGICE3 AT32UC3C164C-AUT 4.53 AT32UC3C1128C-AUT 5.48 Atmel Studio 6 IDE AT32UC3C1256C-AUT 6.73 AT32UC3C1512C-AUT 7.94 AT32UC3C264C-A2UT 4.21 Atmel Software Library of C AT32UC3C2128C-A2UT 5.09 Framework source code AT32UC3C2256C-A2UT 6.25 AT32UC3C2512C-A2UT 7.38 ATSTK600 + Starter kit TQFP144 Atmel Corporation 1600 Technology Drive, San Jose, CA 95110 USA T: (+1)(408) 441-0311 F: (+1)(408) 487-2600 www.atmel.com 2012 Atmel Corporation. All rights reserved. Rev.: 32187B AVR UC3C E US-0912 Atmel , Atmel logo and combinations thereof, and others are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others. Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN THE ATMEL TERMS AND CONDITIONS OF SALES LOCATED ON THE ATMEL WEBSITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RE- LATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS AND PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and products descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.