DSC8101 DSC8121 Programmable Low-Jitter Precision CMOS Oscillator General Description Features The DSC8101 & DSC8121 series of high Low RMS Phase Jitter: <1 ps (typ) performance field-programmable oscillators High Stability: 10, 25, 50 ppm utilizes a proven silicon MEMS technology to provide excellent jitter and stability over a Wide Temperature Range wide range of supply voltages and o Automotive: -55 to 125 C temperatures. Using the TIMEFLASH o Ext. Industrial: -40 to 105 C programmer, the end user can easily o Industrial: -40 to 85 C program the oscillators frequency in the field o Ext. commercial: -20 to 70 C for immediate testing or use in advance prototype development or production. High Supply Noise Rejection: -50 dBc Short Lead Time: 2 Weeks DSC8101 has a standby feature allowing it to completely power-down when EN pin is Wide Freq. Range: 10 to 170 MHz pulled low whereas for DSC8121, only the Small Industry Standard Footprints outputs are disabled when EN is low. Both o 2.5x2.0, 3.2x2.5, 5.0x3.2, & 7.0x5.0 mm oscillators are available in industry standard 2 packages, including the small 3.2x2.5 mm , Excellent Shock & Vibration Immunity and are drop-in replacement for standard o Qualified to MIL-STD-883 4-pin CMOS quartz oscillators. High Reliability o 20x better MTF than quartz oscillators Low Current Consumption Supply Range of 2.25 to 3.6 V Block Diagram Standby & Output Enable Function Lead Free & RoHS Compliant Applications Storage Area Networks o SATA, SAS, Fibre Channel Passive Optical Networks o EPON, 10G-EPON, GPON, 10G-PON Ethernet o 1G, 10GBASE-T/KR/LR/SR, and FCoE Output Enable Modes HD/SD/SDI Video & Surveillance EN Pin DSC8101 DSC8121 PCI Express High Output Active Output Active DisplayPort NC Output Active Output Active Low Standby Output Disabled DSC8101 DSC8121 Page 1 MK-Q-B-P-D-030411-01-2 Programmable Low-Jitter Precision CMOS Oscillator DSC8101 DSC8112 1 Absolute Maximum Ratings Ordering Code Item Min Max Unit Condition Temp Range E: -20 to 70 Supply Voltage -0.3 +4.0 V Enable Modes Packing I: -40 to 85 0: Enable/Standby T: Tape & Reel L: -40 to 105 Input Voltage -0.3 V +0.3 V DD 2: Enable/Disable : Tube M: -55 to 125 Junction Temp - +150 C Storage Temp -55 +150 C DSC81 0 1 C I 5 125.0000 T - Soldering Temp - +260 C 40sec max. ESD - V Package Stability Freq (MHz) HBM 4000 A: 7.0x5.0mm 1: 50ppm 125.0000 B: 5.0x3.2mm 2: 25ppm MM 400 C: 3.2x2.5mm 5: 10ppm CDM 1500 D: 2.5x2.0mm N: 7.0x5.0mm (no center pad) Note: 1000+ years of data retention on internal memory Specifications Parameter Condition Min. Typ. Max. Unit 1 Supply Voltage V 2.25 3.6 V DD EN pin low output is disabled Supply Current I DSC8101 0.095 mA DD DSC8121 20 22 Frequency Stability Includes frequency variations due Ext Comm. & Ind. only 10 f to initial tolerance, temp. and ppm All temp ranges 25 power supply voltage All temp ranges 50 Aging f 1 year 25C 5 ppm 2 Startup Time t T=25C 5 ms SU Input Logic Levels Input logic high V 0.75xV - V IH DD Input logic low V - 0.25xV IL DD 3 Output Disable Time t 5 ns DA DSC8101 5 ms Output Enable Time t EN DSC8121 20 ns 4 Enable Pull-Up Resistor Pull-up resistor exist 40 k CMOS Output output is enabled 4 Supply Current I 31 35 mA DD C =15pF, F =125 MHz L 0 Output Logic Levels Output logic high V I=6mA 0.9xV - V OH DD Output logic low V - 0.1xV OL DD 3 Output Transition time 20% to 80% Rise Time t 1.1 2 ns R C =15pF L Fall Time t 1.3 2 F All temp range except Auto 10 170 Frequency f MHz 0 Auto temp range 100 Output Duty Cycle SYM 45 55 % Fout=125MHz 3 Period Jitter J ps PER RMS 200kHz to 20MHz 125MHz 0.3 Integrated Phase Noise J 100kHz to 20MHz 125MHz 0.38 ps PH RMS 12kHz to 20MHz 125MHz 1.7 2 1. Pin 6 V should be filtered with 0.1uf capacitor. DD 2. t is time to 100PPM of output frequency after V is applied and outputs are enabled. su DD 3. Output Waveform and Test Circuit figures below define the parameters. 4. Output is enabled if pad is floated or not connected. DSC8101 DSC8121 Page 2 MK-Q-B-P-D-030411-01-2