HV825LG-G Microchip

HV825 High-Voltage EL Lamp Driver IC Features General Description Processed with HVCMOS Technology The HV825 is a high-voltage driver designed for driv- 1.0 to 1.6V Operating Supply Voltage ing EL lamps typically up to 6.0 nF. The input supply DC to AC Conversion voltage range is from 1.0V to 1.6V. The device uses a Output Load of Typically up to 6.0 nF single inductor and a minimum number of passive components. The typical output voltage that can be Adjustable Output Lamp Frequency applied to the EL lamp is 56V. Adjustable Converter Frequency The HV825 can be enabled/disabled by connecting Enable Function the R resistor to V /GND. SW-Osc DD The HV825 has two internal oscillators to drive a switch- Applications ing bipolar junction transistor (BJT), and a high-voltage Pagers EL lamp driver. The frequency for the switching BJT is Portable Transceivers set by an external resistor connected between the R SW- Cellular Phones pin and the V supply pin. The EL lamp driver fre- Osc DD Remote Control Units quency is set by an external resistor connected between Calculators the R pin and the V pin. An external inductor is EL-Osc DD connected between the L and V pins. A 0.01 to X DD 0.1 F, 100V capacitor is connected between the C pin S and the GND pin. The EL lamp is connected between the V pin and the V pin. A B The switching BJT charges the external inductor and discharges it into the 0.01 to 0.1 F, 100V capacitor at the C pin. The voltage at the C pin will start to S S increase. The outputs V and V are configured as an A B H-bridge, and are switching in opposite states to achieve a peak-to-peak voltage of two times the V CS voltage across the EL lamp. Typical Application Circuit 0 ON = V DD OFF = 0V VDD REL-Osc 1 8 N 2 RSW-Osc VA 7 560 H EL Lamp 3 VB 6 CS 1N4148 V = V = 1.5V DD IN 2 GND 5 0.1 F 4 LX 0.01 F 1.0 nF 16V 100V 2015 Microchip Technology Inc. DS20005450A-page 1HV825 Package Types V 1 8 REL-Osc DD RSW-Osc 2 7 VA CS 3 6 VB LX 4 5 GND 8-Lead SOIC / 8-Lead MSOP Block Diagram LX VDD CS RSW-Osc Switch Q Osc VA GND Q Output Osc Q VB REL-Osc Q Test Circuit Enable ON = V DD 0 OFF = GND VDD REL-Osc 1 8 N N 2 1 RSW-Osc VA 7 560 H 4.7 nF 3 VB 6 CS V = V = 1.0V - 1.6V 1N4148 DD IN Equivalent to GND LX 5 4 0.1 F 2 1.5 in lamp 0.01 F C SW 100V 1.0 nF 1: Murata part LGH4N561K04 DS20005450A-page 2 2015 Microchip Technology Inc.