1N6103A 1N6137A Qualified Levels: Voidless Hermetically Sealed Bidirectional JAN, JANTX, JANTXV Available on Transient Voltage Suppressors and JANS* commercial Qualified to MIL-PRF-19500/516 versions DESCRIPTION This series of industry recognized voidless, hermetically sealed bidirectional Transient Voltage Suppressors (TVS) is military qualified to MIL-PRF-19500/516 and is ideal for high-reliability applications where a failure cannot be tolerated. They provide a Working Peak Standoff Voltage selection from 5.7 to 152 volts with a 500 watt rating for a 10/1000 s pulse. They are very robust in hard-glass construction and use internal Category 1 metallurgical bonds. These devices are available as both a non-suffix part and an A version providing different voltage tolerances as described in the nomenclature section. These devices are also available in a surface mount MELF package configuration. Important: For the latest information, visit our website 1N6103A 1N6137A MECHANICAL and PACKAGING CASE: Hermetically sealed voidless hard glass with tungsten slugs. TERMINALS: Axial-leads are tin/lead over copper. RoHS compliant matte-tin is available on commercial grade only. MARKING: Body paint and part number. POLARITY: No polarity marking for these bidirectional TVSs. TAPE & REEL option: Standard per EIA-296. Consult factory for quantities. WEIGHT: Approximately 750 milligrams. See Package Dimensions on last page. PART NOMENCLATURE Applicable to entire series: JAN 1N6103 A (e3) Reliability Level RoHS Compliance JAN = JAN Level e3 = RoHS compliant (available on commercial grade only) JANTX = JANTX Level JANTXV = JANTXV Level Blank = non-RoHS compliant Blank = commercial Voltage Tolerance JEDEC type number A = Standard See Electrical Characteristics Blank =5% higher V , 5% lower C table min. V and 5% lower I (BR) PP Applicable to 1N6103(A) thru 1N6118(A) only: JANS 1N6103 A Reliability Level Voltage Tolerance JANS = JANS Level A = Standard Blank =5% higher V , 5% lower C JEDEC type number min. V and 5% lower I (BR) PP See Electrical Characteristics table Applicable to 1N6119(A) thru 1N6137(A) only: MSP 1N6119 A (e3) Reliability Level RoHS Compliance MSP (reference JANS) e3 = RoHS compliant Blank = non-RoHS compliant JEDEC type number Voltage Tolerance See Electrical Characteristics table A = Standard Blank =5% higher V , 5% lower C min. V and 5% lower I (BR) PP T4-LDS-0277, Rev. 1 (121354) 2013 Microsemi Corporation Page 2 of 6