JANTX1N6470 Microchip

1N6469 1N6476 WWW.Microsemi .COM 1N6469 thru 1N6476 Voidless-Hermetically-Sealed Unidirectional SCOTTSDALE DIVISION Transient Suppressors DESCRIPTION APPEARANCE This series of industry recognized voidless-hermetically-sealed Unidirectional Transient Voltage Suppressor (TVS) designs is military qualified to MIL-PRF- 19500/552 and are ideal for high-reliability applications where a failure cannot be tolerated. They provide a Working Peak Standoff Voltage selection from 5.0 to 51.6 Volts with 1500 W ratings. They are very robust in hard-glass construction and also use an internal metallurgical bond identified as Category I for high reliability applications. The 1500 W series is military qualified to MIL-PRF-19500/552. These devices are also available in a surface mount MELF package configuration by adding a US suffix (see separate data sheet for 1N6469US thru 1N6476AUS). Microsemi also offers numerous other TVS products to meet higher and lower peak pulse power G Package and voltage ratings in both through-hole and surface-mount packages. IMPORTANT: For the most current data, consult MICROSEMIs website: 1N6469 1N6476 WWW.Microsemi .COM 1N6469 thru 1N6476 Voidless-Hermetically-Sealed Unidirectional SCOTTSDALE DIVISION Transient Suppressors ELECTRICAL CHARACTERISTICS MAXIMUM MAXIMUM BREAKDOWN CLAMPING PEAK PULSE MAXIMUM BREAK WORKING MAX CURRENT VOLTAGE CURRENT TEMP. DOWN PEAK LEAKAGE TYPE I V COEF. OF VOLTAGE (BR) VOLTAGE CURRENT C I PP V(BR) V I 10/1000 s V (BR) WM D MIN. 8/20 s 10/1000 s o Volts mAdc Vdc V(pk) A(pk) A(pk) %/ C Adc 1N6469 5.6 50 5 1500 9.0 945 167 -.03, +0.04 1N6470 6.5 50 6 1000 11.0 775 137 0.06 1N6471 13.6 10 12 20 22.6 374 66 0.085 1N6472 16.4 10 15 10 26.5 322 57 0.085 1N6473 27.0 5 24 5 41.4 207 36.5 .096 1N6474 33.0 1 30.5 5 47.5 181 32 .098 1N6475 43.7 1 40.3 5 63.5 135 24 .101 1N6476 54.0 1 51.6 5 78.5 107 19 .103 SYMBOLS & DEFINITIONS Symbol Definition V Minimum Breakdown Voltage: The minimum voltage the device will exhibit at a specified current. BR Working Peak Voltage: The maximum peak voltage that can be applied over the operating temperature range. V WM This is also referred to as Standoff Voltage. I Maximum Standoff Current: The maximum current that will flow at the specified voltage and temperature. D V Maximum clamping voltage at specified I (Peak Pulse Current) at the specified pulse conditions. C PP Peak Pulse Power: The peak power dissipation resulting from the peak impulse current I . P PP PP GRAPHS Peak Value I PP Pulse time duration (tp) is defined as that point where I decays to 50% of peak P value (I ). PP time (t) in milliseconds FIG. 1 Non-repetive peak pulse power rating curve FIG. 2 Pulse wave form for exponential surge NOTE: Peak power defined as peak voltage times peak current for 10/1000 s Copyright 2007 Microsemi Page 2 10-03-2007 REV C Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Pulse current (I ) in percent of I P PP