LAN7500/LAN7500i Hi-Speed USB 2.0 to 10/100/1000 Ethernet Controller Datasheet PRODUCT FEATURES Flexible address filtering modes Highlights 33 exact matches (unicast or multicast) Single Chip Hi-Speed USB 2.0 to 10/100/1000 512-bit hash filter for multicast frames Ethernet Controller Pass all multicast Promiscuous unicast/multicast modes 10/100/1000 Ethernet MAC with Full-Duplex Support Inverse filtering 10/100/1000 Ethernet PHY with HP Auto-MDIX Pass all incoming with status report Integrated USB 2.0 Hi-Speed Device Controller Wakeup packet support Perfect DA frame, wakeup frame, magic packet, Integrated USB 2.0 Hi-Speed PHY broadcast frame, IPv6 & IPv4 TCP SYN Implements Reduced Power Operating Modes 8 programmable 128-bit wakeup frame filters Supports EEPROM-less Operation for Reduced BOM ARP and NS offload PME pin support NetDetach provides automatic USB attach/detach Integrated Ethernet PHY when Ethernet cable is connected/removed Auto-negotiation Target Applications Automatic polarity detection and correction HP Auto-MDIX support Embedded Systems / CE Devices Link status change wake-up detection Set-Top Boxes / PVRs Support for 5 status LEDs Supports various statistical counters Networked Printers Power and I/Os USB Port Replicators Various low power modes Standalone USB to Ethernet Dongles 12 GPIOs Test Instrumentation / Industrial Supports bus-powered and self-powered operation Variable voltage I/O supply (2.5V/3.3V) Key Benefits Miscellaneous Features USB Device Controller EEPROM Controller Fully compliant with USB Specification Revision 2.0 IEEE 1149.1 (JTAG) Boundary Scan Supports HS (480 Mbps) and FS (12 Mbps) modes Requires single 25 MHz crystal Four endpoints supported Software Supports vendor specific commands Windows XP/ Vista / Windows 7 Driver Integrated USB 2.0 PHY Linux Driver Remote wakeup supported Win CE Driver High-Performance 10/100/1000 Ethernet Controller MAC OS Driver Fully compliant with IEEE802.3/802.3u/802.3ab EEPROM/Manufacturing Utility for Windows/DOS Integrated Ethernet MAC and PHY PXE Support 10BASE-T, 100BASE-TX, and 1000BASE-T support DOS ODI Driver Full- and half-duplex capability (only full-duplex Packaging operation at 1000Mbps) 56-pin QFN (8x8 mm) lead-free RoHS compliant Full-duplex flow control Environmental Preamble generation and removal Commercial Temperature Range (0C to +70C) Automatic 32-bit CRC generation and checking Industrial Temperature Range (-40C to +85C) 9 KB jumbo frame support Automatic payload padding and pad removal Loop-back modes Supports checksum offloads (IPv4, IPv6, TCP, UDP) Supports Microsoft NDIS 6.2 large send offload Supports IEEE 802.1q VLAN tagging Ability to add and strip IEEE 802.1q VLAN tags VLAN tag based packet filtering (all 4096 VIDs) SMSC LAN7500/LAN7500i Revision 1.0 (11-01-10) DATASHEETHi-Speed USB 2.0 to 10/100/1000 Ethernet Controller Datasheet Order Numbers: LAN7500-ABZJ for 56 pin, QFN lead-free RoHS compliant package (0 to +70C temp range) LAN7500i-ABZJ for 56 pin, QFN lead-free RoHS compliant package (-40 to +85C temp range) This product meets the halogen maximum concentration values per IEC61249-2-21 For RoHS compliance and environmental information, please visit www.smsc.com/rohs 80 ARKAY DRIVE, HAUPPAUGE, NY 11788 (631) 435-6000, FAX (631) 273-3123 Copyright 2010 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC s standard Terms of Sale Agreement dated before the date of your order (theTerms of Sale Agreemen). The product may contain design defects or errors known as anomalies which may cause the product s functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSCs website at