LAN8700/LAN8700i 15kV ESD Protected MII/RMII 10/100 Ethernet Transceiver with HP Auto-MDIX Support and flexPWR Technology in a Small Footprint Data Brief PRODUCT FEATURES Single-Chip Ethernet Physical Layer Transceiver Vendor Specific register functions (PHY) Low profile 36-pin QFN lead-free RoHS compliant ESD Protection levels of 8kV HBM without external package (6 x 6 x 0.9mm height) protection devices 4 LED status indicators ESD protection levels of IEC61000-4-2, 8kV contact Commercial Operating Temperature 0 C to 70 C mode, and 15kV for air discharge mode per Industrial Operating Temperature -40 C to 85 C independent test facility version available (LAN8700i) Comprehensive flexPWR Technology Flexible Power Management Architecture Applications LVCMOS Variable I/O voltage range: +1.6V to +3.6V Integrated 3.3V to 1.8V regulator for optional single Set Top Boxes supply operation. Network Printers and Servers Regulator can be disabled if 1.8V system supply is LAN on Motherboard available. 10/100 PCMCIA/CardBus Applications Performs HP Auto-MDIX in accordance with IEEE 802.3ab specification Embedded Telecom Applications Cable length greater than 150 meters Video Record/Playback Systems Automatic Polarity Correction Cable Modems/Routers Latch-Up Performance Exceeds 150mA per DSL Modems/Routers EIA/JESD 78, Class II Digital Video Recorders Energy Detect power-down mode Personal Video Recorders Low Current consumption power down mode IP and Video Phones Low operating current consumption: Wireless Access Points 39mA typical in 10BASE-T and Digital Televisions 79mA typical in 100BASE-TX mode Digital Media Adaptors/Servers Supports Auto-negotiation and Parallel Detection POS Terminals Supports the Media Independent Interface (MII) and Automotive Networking Reduced Media Independent Interface (RMII) Gaming Consoles Compliant with IEEE 802.3-2005 standards MII Pins tolerant to 3.6V Security Systems IEEE 802.3-2005 compliant register functions POE Applications Integrated DSP with Adaptive Equalizer Access Control Baseline Wander (BLW) Correction SMSC LAN8700/LAN8700i PRODUCT PREVIEW Revision 2.3 (04-12-11) 15kV ESD Protected MII/RMII 10/100 Ethernet Transceiver with HP Auto-MDIX Support and flexPWR Technology in a Small Footprint Order Numbers: LAN8700C-AEZG for 36-pin, QFN lead-free RoHS compliant package LAN8700iC-AEZG for (Industrial Temp) 36-pin, QFN lead-free RoHS compliant package 4900 pcs per tray LAN8700C-AEZG-TR for 36-pin, QFN lead-free RoHS compliant package (tape and reel) 3000 pcs per reel This product meets the halogen maximum concentration values per IEC61249-2-21 For RoHS compliance and environmental information, please visit www.smsc.com/rohs 80 ARKAY DRIVE, HAUPPAUGE, NY 11788 (631) 435-6000 or 1 (800) 443-SEMI Copyright 2011 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC s standard Terms of Sale Agreement dated before the date of your order (theTerms of Sale Agreemen). The product may contain design defects or errors known as anomalies which may cause the product s functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSCs website at