LAN9730/LAN9730i High-Speed Inter-Chip (HSIC) USB 2.0 to 10/100 Ethernet Controller Datasheet PRODUCT FEATURES Flexible address filtering modes Highlights One 48-bit perfect address Single Chip HSIC USB 2.0 to 10/100 Ethernet 64 hash-filtered multicast addresses Controller Pass all multicast Integrated 10/100 Ethernet MAC with Full-Duplex Promiscuous mode Support Inverse filtering Pass all incoming with status report Integrated 10/100 Ethernet PHY with HP Auto-MDIX Wakeup packet support Support Integrated Ethernet PHY Integrated USB 2.0 Hi-Speed Device Controller Auto-negotiation Integrated HSIC Interface Automatic polarity detection and correction HP Auto-MDIX support Implements Reduced Power Operating Modes Link status change wake-up detection Target Applications Support for three status LEDs External MII and Turbo MII support HomePNA and Embedded Systems HomePlug PHY Set-Top Boxes Power and I/Os PVRs Various low power modes CE Devices Supports PCI-like PME wake when USB Host disabled 11 GPIOs Networked Printers Supports bus-powered and self-powered operation USB Port Replicators Integrated power-on reset circuit Test Instrumentation Single external 3.3 V I/O supply Industrial Optional internal core regulator Miscellaneous Features Key Features EEPROM controller USB Device Controller Supports custom operation without EEPROM Fully compliant with Hi-Speed Universal Serial Bus IEEE 1149.1 (JTAG) boundary scan Specification, revision 2.0 Requires single 25 MHz crystal Supports HS (480 Mbps) mode Software Four Endpoints supported Windows 8/7/XP/Vista driver Supports vendor specific commands Linux driver Integrated HSIC Interface Win CE driver Remote wakeup supported MAC OS driver High-Performance 10/100 Ethernet Controller EEPROM utility Fully compliant with IEEE 802.3/802.3u Packaging Integrated Ethernet MAC and PHY 56-pin QFN (8 x 8 mm) lead-free, RoHS compliant 10BASE-T and 100BASE-TX support Full- and half-duplex support Environmental Full- and half-duplex flow control Commercial Temperature Range (0C to +70C) Preamble generation and removal Industrial Temperature Range (-40C to +85C) Automatic 32-bit CRC generation and checking Automatic payload padding and pad removal Loop-back modes TCP/UDP/IP/ICMP checksum offload support SMSC LAN9730/LAN9730i Revision 1.1 (05-13-13) DATASHEETHigh-Speed Inter-Chip (HSIC) USB 2.0 to 10/100 Ethernet Controller Datasheet Order Numbers: LAN9730-ABZJ (Tray) for 56-pin, QFN lead-free RoHS compliant package (0 to +70C temp) LAN9730i-ABZJ (Tray) for 56-pin, QFN lead-free RoHS compliant package (-40 to +85C temp) LAN9730-ABZJ-TR (Tape & Reel) for 56-pin, QFN lead-free RoHS compliant package (0 to +70C temp) LAN9730i-ABZJ-TR (Tape & Reel) for 56-pin, QFN lead-free RoHS compliant package (-40 to +85C temp) This product meets the halogen maximum concentration values per IEC61249-2-21 For RoHS compliance and environmental information, please visit www.smsc.com/rohs Please contact your SMSC sales representative for additional documentation related to this product such as application notes, anomaly sheets, and design guidelines. Copyright 2013 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC s standard Terms of Sale Agreement dated before the date of your order (theTerms of Sale Agreemen). The product may contain design defects or errors known as anomalies which may cause the product s functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSCs website at