M15KP180CAE3 Microchip

M15KP22A M15KP280CA(e3) Screening in 15,000 Watt Transient Voltage Suppressor reference to Available MIL-PRF-19500 (TVS) Protection Device available DESCRIPTION This Transient Voltage Suppressor series of M15KP22A M15KP280CA offers an extended voltage range and also provides a variety of high reliability, uni- and bi-directional options as well. RoHS compliant versions are also available. These devices have the ability to clamp dangerous high voltage transients such as secondary effects of lightning strikes, providing circuit protection to several class levels in the IEC61000-4-5 specification. Clamping time is virtually instantaneous. It also provides protection from transients caused by inductive load dumps, RFI, and ESD, providing protection to IEC61000-4-2 and -4-4. Important: For the latest information, visit our website M15KP22A M15KP280CA(e3) MAXIMUM RATINGS 25 C unless otherwise noted Parameters/Test Conditions Symbol Value Unit o Junction and Storage Temperature T and -65 to +150 C J T STG o Thermal Resistance, Junction to Lead 3/8 inch (10 mm) R 20 C/W JL lead length from body (1) o Thermal Resistance, Junction to Ambient R 80 C/W JA (2) Peak Pulse Power Dissipation 10/1000us P 15,000 W PP Steady-State Power Dissipation T = 30 C 3/8 inch P 6 W L D (1) (10 mm) from body 1.56 Unidirectional < 100 ps T (0 volts to V min, theoretical) clamping (BR) Bidirectional < 5 ns (3) Surge Peak Forward Current I 200 A FSM o Solder Temperature 10 s 260 C 2 Notes: 1. When mounted on FR4 PC board with 4 mm copper pads (1 oz) and track width 1 mm, length 25 mm. 2. With impulse repetition rate (duty factor) of 0.01 % or less (also Figures 1 and 2). 3. At 8.3 ms half-sine wave for unidirectional devices only. MECHANICAL and PACKAGING CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0. TERMINALS: Tin-lead or RoHS compliant annealed matte-tin plating. Solderable per MIL-STD-750, method 2026. MARKING: Part number. POLARITY: Cathode indicated by band. No cathode band on bidirectional devices. TAPE & REEL option: Standard per EIA-296 (add TR suffix to part number). Consult factory for quantities. WEIGHT: Approximately 1.4 grams. See Package Dimensions on last page. PART NOMENCLATURE M 15 K P 22 C A (e3) Reliability Level* RoHS Compliance M e3 = RoHS compliant MA Blank = non-RoHS compliant MX MXL Voltage Tolerance (*see Hirel Non-Hermetic A = 5% tolerance level Product Portfolio) Polarity Peak Pulse Power C = Bi-directional Blank = Unidirectional Kilowatt Rating Stand-off Voltage Rating Encapsulated Plastic (see Electrical Characteristics Package table) RF01011, Rev. D (15/06/15) 2015 Microsemi Corporation Page 2 of 7