M5KP5.0A M5KP110CA(e3) Screening in 5,000 Watt Transient Voltage Suppressor reference to Available MIL-PRF-19500 (TVS) Protection Device available DESCRIPTION This Transient Voltage Suppressor series M5KP5.0A M5KP110CA provides a range of standoff voltage options from 5.0 to 110 V in unidirectional, bidirectional, RoHS compliant, and SnPb solder dipped options. Multiple advanced screening levels are available for enhanced reliability. Clamping action is almost instantaneous. As a result, they provide effective protection from ESD or EFT per IEC61000-4-2 and IEC61000-4-4, as well as transients caused by inductive switching and RFI. They also protect from secondary lightning effects per 61000-4-5 at the class levels specified below. Important: For the latest information, visit our website M5KP5.0A M5KP110CA(e3) MAXIMUM RATINGS 25 C unless otherwise noted Parameters/Test Conditions Symbol Value Unit o Junction and Storage Temperature T and -65 to +150 C J T STG o Thermal Resistance, Junction to Lead 0.375 inch R 20 C/W JL (9.5 mm) lead length from body (1) o Thermal Resistance, Junction to Ambient R 80 C/W JA (2) Peak Pulse Power Dissipation 10/1000 s P 5000 W PP Steady-State Power Dissipation T = 25 C P 6 W L D (1) 0.375 inch (9.5 mm) from body 1.56 Unidirectional < 100 ps T (0 volts to V min, theoretical) clamping ( BR) Bidirectional < 5 ns (3) Forward Voltage V 3.5 V F o Solder Temperature 10 s 260 C 2 Notes: 1. When mounted on FR4 PC board with 4 mm copper pads (1 oz) and track width 1 mm, length 25 mm. 2. With impulse repetition rate (duty factor) of 0.01 % or less (also Figure 1 and 2). 3. At 100 amp peak impulse of 8.3 ms half-sine wave (unidirectional only). MECHANICAL and PACKAGING CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0 TERMINALS: Tin-lead or RoHS compliant annealed matte-tin plating. Solderable per MIL-STD-750, method 2026. MARKING: Part number POLARITY: Cathode indicated by band. No cathode band on bidirectional devices. TAPE & REEL option: Standard per EIA-296 (add TR suffix to part number). Consult factory for quantities. WEIGHT: Approximately 1.4 grams See Package Dimensions on last page. PART NOMENCLATURE M 5K P 5.0 C A (e3) Reliability Level* RoHS Compliance M e3 = RoHS compliant MA Blank = non-RoHS compliant MX MXL 5% Voltage Tolerance (*see HiRel Non-Hermetic Product Portfolio) Polarity C = Bi-directional 5 Kilowatt Rating Blank = Unidirectional Encapsulated Plastic Stand-off Voltage Rating Package (see Electrical Characteristics table) RF01010, Rev. B (9/13/13) 2013 Microsemi Corporation Page 2 of 7