PIC18F Development Tools Get Your Design Started Quickly with PIC18F Development Tools Low-Pin Count PIC18 Microcontrollers FEATURED SOFTWARE TOOLS: (www.microchip.com/PIC18) MPLAB C18 (SW006011) PICDEM 2 Plus (DM163022) The MPLAB C18 compiler is a full-featured ANSI-compliant The PICDEM 2 Plus demonstrates the C compiler for the PIC18 family of 8-bit MCUs. MPLAB capabilities of the 18, 28 and 40-pin C18 is a fully integrated component of Microchips MPLAB PIC18 and PIC16 devices. It can be Integrated Development Environment (IDE), allowing source used stand-alone with a programmed level debugging with the MPLAB ICD 2 in-circuit debugger, part and with MPLAB REAL ICE or MPLAB REAL ICE emulator and MPLAB SIM simulator. A MPLAB ICD 2. The board has a FREE 60-day demo of the MPLAB C18 compiler is available prototyping area, LCD display, piezo sounder driven by at: www.microchip.com/C18. PWM signal, RS-232, temperature sensor, 4 LEDs and 2 MPLAB Visual Device Initializer (VDI) push button switches. MPLAB VDI graphically con gures the microprocessor and peripherals, and when complete, generates code usable USB Interface (www.microchip.com/USB) in assembly language or C programs. MPLAB VDI does PICDEM Full-Speed USB Demo Board (DM163025) extensive error checking on assignments and settings, and The FS-USB evaluation board features the PIC18F4550 generates and error message if there are con icts on any device with full-speed USB 2.0 operation (12 Mbit/s). The resources. Download VDI with MBLAB IDE at: demo board comes pre-loaded with a USB bootloader and www.microchip.com/MPLAB. includes a 20 MHz crystal, serial port, voltage regulation Application Maestro Software with the ability to switch from external power supply to A stand-alone module tool used to con gure and USB bus supply, expansion connector, compatible with the incorporate a range of pre-written rmware modules PICtail daughter boards standard, temperature sensor, into PICmicrocontroller applications. Using a graphic potentiometer, 2 LEDs for status display and 2 input interface, select one or more modules, then con gure switches. the parameters listed. The Application Maestro software PIC18F87J50 FS USB Plug-in Module (MA180021) generates code that can be incorporated into the A simple USB Plug-in Module can be used to evaluate the application project, using MPLAB IDE or any compatible PIC18F87J50 family with the HPC Explorer Board. This development environment. Download at: PIM includes a full-speed USB interface and automatically www.microchip.com/applicationmaestro. adjusts the voltage to accommodate this 3V device. FEATURED DEMONSTRATION BOARDS: ZigBee and MiWi Wireless Networking Protocols High-Pin Count PIC18 Microcontrollers (www.microchip.com/ZigBee) (www.microchip.com/PIC18) PICDEM Z Demonstration Board (DM163027-4) PICDEM HPC Explorer (DM183022) The PICDEM Z demo board is an easy-to-use ZigBee This low-cost demo board is used wireless communication protocol development and to evaluate the performance of High demonstration platform. The kit includes the ZigBee Pin Count (HPC) 8-bit PIC18F series protocol stack and two PICDEM Z boards, each with an microcontrollers. The board features a RF daughter card, and features Microchips MRF24J40 PIC18F8722, which is the superset of 2.4 GHz IEEE 802.15.4 transceiver and PIC18 high- the entire 64 and 80-pin PIC18F general performance microcontroller. Both a ZigBee software purpose family. A daughter board (mezzanine) is also part stack and a smaller MiWi protocol stack are available from of the kit and allows different processors sharing the same Microchip under a no-cost license agreement. pin-out to be mounted and tested on the Explorer board. ZENA Wireless Network Analyzer Tool (DM183023) PIC18 J-series Plug-in Modules (MA180011-16) Microchips ZENA wireless network The HPC Explorer Board can also be used to evaluate the analyzer uses a simple graphical PIC18 J-series 3V devices with the use of Plug-in Modules interface to con gure the free Microchip (PIMs). ZigBee and MiWi protocol stacks. Consisting of both hardware and PICkit 2 PIC18J Demo Board (DM164120-5) software, the ZENA wireless network analyzer is an IEEE This ultra low-cost small demo board features the 802.15.4 protocol analyzer that is capable of decoding PIC18F87J10 device. This board is used with the PICkit 2 ZigBee and MiWi protocol packets. Programmer (PG164120). Microc hip Tec hnology IncorporatedLCD Segmented Display (www.microchip.com/LCD) PICDEM MC Low Voltage (DM183021) This board offers a cost-effective method PICDEM LCD 2 Demonstration Board (DM163030) of evaluating and developing sensored or The PICDEM LCD 2 board demonstrates the features of sensorless brushless DC (BLDC) motor the LCD Flash 28, 40, 64 and 80-pin PIC microcontrollers. control applications. The board supports The board is populated with the PIC18F85J90 MCU and 28-pin, PIC18 microcontrollers and is other devices are supported via a separate pack of capable of controlling motors rated up Plug-in Modules (MA160011). A sample 3V LCD glass to 48V and 2.2 amps. Pre-programmed PIC18F2431 and display is included for custom prototyping and can dsPIC30F3010 devices are included. demonstrate the PIC18F85J90 boost and contrast capability. The board ships with demo code and can nanoWatt Technology (www.microchip.com/LowPower) operate with a lithium coin cell. Low Power Demonstration Board (DM163026) This board uses the PIC18F4620 for demonstrating Ethernet Technology (www.microchip.com/Ethernet) nanoWatt features and implementing system power PICDEM.net 2 Development Board (DM163024) reduction techniques. Included on the board are a fully The PICDEM.net 2 Board is an Ethernet development functional ultrasonic range nder with LCD display, a DC board supporting both the popular ENC28J60 Ethernet boost circuit, USART, test points to measure system and Controller and the single-chip Ethernet microcontroller PIC power consumption, three switches, 2 LEDs and a family, the PIC18F97J60. Using Microchips free TCP/IP Microchip TC1047A temperature sensor. Three self-paced, stack and this board, a web server can be developed step-by-step lab exercises are included on CD-ROM. showcasing the capability to remote monitor and control embedded applications over the Internet. Features include FEATURED DEBUGGERS & PROGRAMMERS: 2 x RJ-45 Ethernet connectors, PICtail connector, LCD MPLAB ICD 2 In-Circuit Debugger (DV164005) display, ICSP/MPLAB ICD 2 interface, programmable A low-cost real-time debugger and programmer buttons/LEDs, temperature sensor, RS-232/RS-485 that works with all of the PIC18 Flash interface and a real time clock. microcontrollers. CAN Technology (www.microchip.com/CAN) PICDEM CAN-LIN 2, 3 (DM163011, DM163015) MPLAB PM3 Programmer (DV007004) Microchip offers two similar PICDEM This sophisticated universal programmer supports all CAN-LIN Demo boards to support different PIC18F devices. PIC microcontrollers. All demonstrate the PICkit 2 Development Programmer (PG164120) main features of the devices, especially An small, easy-to-use starter kit that enables users to start those features of the integrated CAN writing code and programming with PIC microcontrollers. module. The board also employs a LIN subnetwork using The programmer interfaces to PICkit demo boards including Microchips PIC16C43X and PIC18F320 devices families. PIC18 J-series and K-series devices. Motor Control (www.microchip.com/MC) MPLAB REAL ICE (DV244005) PICDEM MC Demonstration Board (DM183011) Microchips latest high speed In-Circuit Emulator system for debugging and programming Microchip Flash The PICDEM MC Demo Board includes everything needed microcontroller devices. to evaluate the high-performance PIC18FXX31 MCUs for motor control design. The board supports motors up to 800 watts, with complete isolation between power and control circuits. This enables connection to debuggers and emulators when high power is connected. The development board comes with pre-programmed PIC18F2431 and PIC18F4431 devices. www.microchip.com/developmenttools Visit our web site for additional product information and to locate your local sales office. Microchip Technology Inc. 2355 W. Chandler Blvd. Chandler, AZ 85224-6199 Information subject to change. The Microchip name and logo, the Microchip logo, MPLAB, PIC and PICmicro are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. Application Maestro, ICSP, MiWi, PICkit, PICDEM, PICDEM.net, PICtail, REAL ICE and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. All other trademarks mentioned herein are property of their respective companies. 2006, Microchip Technology Incorporated. All Rights Reserved. Printed in the U.S.A. 12/06 DS39673C *DS39673C*