MCP14A0602T-E/MS Microchip

MCP14A0601/2 6.0A MOSFET Driver with Low Threshold Input and Enable Features General Description High Peak Output Current: 6.0A (typical) The MCP14A0601/2 devices are high-speed MOSFET drivers that are capable of providing up to 6.0A of peak Wide Input Supply Voltage Operating Range: current while operating from a single 4.5V to 18V - 4.5V to 18V supply. There are two output configurations available; Low Shoot-Through/Cross-Conduction Current in inverting (MCP14A0601) and noninverting Output Stage (MCP14A0602). These devices feature low shoot- High Capacitive Load Drive Capability: through current, fast rise and fall times, and matched - 2500 pF in 10 ns (typical) propagation delays which make them ideal for high switching frequency applications. Short Delay Times: 22 ns (t ), 22 ns (t ) (typical) D1 D2 Low Supply Current: 375 A (typical) The MCP14A0601/2 family of devices offers enhanced control with Enable functionality. The active-high Low-Voltage Threshold Input and Enable with Enable pin can be driven low to drive the output of the Hysteresis MCP14A0601/2 low, regardless of the status of the Latch-Up Protected: Withstands 500 mA Reverse Input pin. An integrated pull-up resistor allows the user Current to leave the Enable pin floating for standard operation. Space-Saving Packages: These devices are highly latch-up resistant under any - 8-Lead MSOP condition within their power and voltage ratings. They - 8-Lead SOIC can accept up to 500 mA of reverse current being - 8-Lead 2 x 3 TDFN forced back into their outputs without damage or logic upset. All terminals are fully protected against Applications electrostatic discharge (ESD) up to 2 kV (HBM) and 200V (MM). Switch Mode Power Supplies Package Types Pulse Transformer Drive Line Drivers MCP14A0601/MCP14A0602 Level Translator MSOP/SOIC Motor and Solenoid Drive V 1 8 V DD DD IN 2 7 OUT/OUT EN OUT/OUT 3 6 GND GND 4 5 MCP14A0601/MCP14A0602 2 x 3 TDFN* V 1 8 V DD DD IN 2 7 OUT/OUT EP 9 EN 3 6 OUT/OUT GND 4 5 GND * Includes Exposed Thermal Pad (EP); see Table 3-1. 2016 Microchip Technology Inc. DS20005593A-page 1MCP14A0601/2 Functional Block Diagram V DD Internal Pull-Up Enable V REF Inverting GND Output V DD Input Non-Inverting Noninverting V REF GND MCP14A0601: Inverting MCP14A0602: Noninverting DS20005593A-page 2 2016 Microchip Technology Inc.