MCP14A1201-E/MS Microchip

MCP14A1201/2 12.0A MOSFET Driver with Low Threshold Input and Enable Features General Description High Peak Output Current: 12.0A (typical) The MCP14A1201/2 devices are high-speed MOSFET drivers that are capable of providing up to 12.0A of Wide Input Supply Voltage Operating Range: peak current while operating from a single 4.5V to 18V - 4.5V to 18V supply. There are two output configurations available Low Shoot-Through/Cross-Conduction Current in inverting (MCP14A1201) and noninverting Output Stage (MCP14A1202). These devices feature low shoot- High Capacitive Load Drive Capability: through current, fast rise and fall times, and matched - 15,000 pF in 25 ns (typical) propagation delays which make them ideal for high switching frequency applications. Short Delay Times: 28 ns (t ), 28 ns (t ) (typical) D1 D2 Low Supply Current: 360 A (typical) The MCP14A1201/2 family of devices offers enhanced control with Enable functionality. The active-high Low-Voltage Threshold Input and Enable with Hysteresis Enable pin can be driven low to drive the output of the MCP14A1201/2 low, regardless of the status of the Latch-Up Protected: Withstands 500 mA Reverse Input pin. An integrated pull-up resistor allows the user Current to leave the Enable pin floating for standard operation. Space-Saving Packages: These devices are highly latch-up resistant under any - 8-Lead MSOP condition within their power and voltage ratings. They - 8-Lead SOIC can accept up to 500 mA of reverse current being - 8-Lead 2 x 3 TDFN forced back into their outputs without damage or logic upset. All terminals are fully protected against Applications kV (HBM) and electrostatic discharge (ESD) up to 2 200V (MM). Switch Mode Power Supplies Package Types Pulse Transformer Drive Line Drivers MCP14A1201/MCP14A1202 Level Translator MSOP/SOIC Motor and Solenoid Drive V V 1 8 DD DD IN 2 7 OUT/OUT EN 3 6 OUT/OUT GND 4 5 GND MCP14A1201/MCP14A1202 2 x 3 TDFN* V V 1 8 DD DD IN 2 7 OUT/OUT EP 9 EN 3 6 OUT/OUT GND GND 4 5 * Includes Exposed Thermal Pad (EP) see Table 3-1. 2019 Microchip Technology Inc. DS20006228A-page 1MCP14A1201/2 Functional Block Diagram V DD Internal Pull-Up Enable V REF Inverting Output-Pin 7 GND Output Pin 6 V DD Input Non-Inverting V REF GND MCP14A1201 Inverting MCP14A1202 NonL nverting DS20006228A-page 2 2019 Microchip Technology Inc.