MCP1541-I/TO Microchip

21653C.book Page 1 Thursday, January 10, 2013 12:55 PM MCP1525/41 2.5V and 4.096V Voltage References Features Description Precision Voltage Reference The Microchip Technology Inc. MCP1525/41 devices are 2.5V and 4.096V precision voltage references that Output Voltages: 2.5V and 4.096V use a combination of an advanced CMOS circuit Initial Accuracy: 1% (max.) design and EPROM trimming to provide an initial Temperature Drift: 50 ppm/C (max.) tolerance of 1% (max.) and temperature stability of Output Current Drive: 2 mA 50ppm/C (max.). In addition to a low quiescent Maximum Input Current: 100 A +25C (max.) current of 100 A (max.) at 25C, these devices offer a clear advantage over the traditional Zener techniques Packages: TO-92 and SOT-23-3 in terms of stability across time and temperature. The Industrial Temperature Range: -40C to +85C output voltage is 2.5V for the MCP1525 and 4.096V for the MCP1541. These devices are offered in SOT-23-3 Applications and TO-92 packages, and are specified over the industrial temperature range of -40C to +85C. Battery-powered Systems Handheld Instruments Temperature Drift Instrumentation and Process Control Test Equipment 2.525 4.140 Data Acquisition Systems 2.520 4.130 2.515 4.120 Communications Equipment 2.510 4.110 MCP1541 Medical Equipment 2.505 4.100 Precision Power supplies 2.500 4.090 2.495 4.080 8-bit, 10-bit, 12-bit A/D Converters (ADCs) MCP1525 2.490 4.070 D/A Converters (DACs) 2.485 4.060 2.480 4.050 Typical Application Circuit 2.475 4.040 -50 -25 0 255075 100 V Ambient Temperature (C) DD MCP1525 MCP1541 C IN Package Types V IN MCP1525 MCP1525 0.1 F V SS MCP1541 MCP1541 (optional) TO-92 SOT-23-3 V OUT V REF V 1 IN C L 3 V SS 1 F to 10 F V 2 OUT Basic Configuration 1 2 3 V SS V OUT V IN 2001-2012 Microchip Technology Inc. DS21653C-page 1 MCP1525 Output Voltage (V) MCP1541 Output Voltage (V)21653C.book Page 2 Thursday, January 10, 2013 12:55 PM MCP1525/41 Notice: Stresses above those listed under Absolute 1.0 ELECTRICAL Maximum Ratings may cause permanent damage to the CHARACTERISTICS device. This is a stress rating only and functional operation of the device at those or any other conditions above those indicated in the operational listings of this specification is not Absolute Maximum Ratings implied. Exposure to maximum rating conditions for extended V V ..........................................................................7.0V periods may affect device reliability. IN SS Input Current (V ) .......................................................20mA IN Output Current (V ) .............................................. 20mA OUT Continuous Power Dissipation (T = 125C)............. 140 mW A All Inputs and Outputs .....................V 0.6V to V +1.0V SS IN Storage Temperature.....................................-65C to +150C Maximum Junction Temperature (T )..........................+125C J ESD protection on all pins (HBM) 4kV DC ELECTRICAL SPECIFICATIONS Electrical Characteristics: Unless otherwise indicated, T =+25C, V = 5.0V, V =GND, I =0 mA and C =1 F. A IN SS OUT L Parameter Sym Min Typ Max Units Conditions Output Output Voltage, MCP1525 V 2.475 2.5 2.525 V 2.7V V 5.5V OUT IN Output Voltage, MCP1541 V 4.055 4.096 4.137 V 4.3V V 5.5V OUT IN Output Voltage Drift TCV 27 50 ppm/CT = -40C to 85C (Note 1) OUT A Long-Term Output Stability V 2 ppm/hr Exposed 1008 hrs +125C OUT (see Figure 1-1), measured +25C Load Regulation V /I 0.5 1 mV/mAI = 0 mA to -2 mA OUT OUT OUT V /I 0.6 1 mV/mAI = 0 mA to 2 mA OUT OUT OUT V /I 1.3 mV/mAI = 0 mA to -2 mA, OUT OUT OUT T = -40C to 85C A V /I 1.3 mV/mAI = 0 mA to 2 mA, OUT OUT OUT T = -40C to 85C A Output Voltage Hysteresis V 115 ppm Note 2 HYS Maximum Load Current I 8 mA T = -40C to 85C, V = 5.5V SC A IN Input-to-Output Dropout Voltage V 137 mV I = 2 mA DROP OUT Line Regulation V / V 107 300 V/V V = 2.7V to 5.5V for MCP1525, OUT IN IN V = 4.3V to 5.5V for MCP1541 IN V / V 350 V/VV = 2.7V to 5.5V for MCP1525, OUT IN IN V = 4.3V to 5.5V for MCP1541, IN T = -40C to 85C A Input Input Voltage, MCP1525 V 2.7 5.5 V T = -40C to 85C IN A Input Voltage, MCP1541 V 4.3 5.5 V T = -40C to 85C IN A Input Current I 86 100 A No load IN I 95 120 A No load, T = -40C to 85C IN A Note 1: Output temperature coefficient is measured using a box method, where the +25C output voltage is trimmed as close to typical as possible. The 85C output voltage is then again trimmed to zero out the tempco. 2: Output Voltage Hysteresis is defined as the change in output voltage measured at +25C before and after cycling the temperature to +85C and -40C refer to Section 1.1.10 Output Voltage Hysteresis. DS21653C-page 2 2001-2012 Microchip Technology Inc.