MCP6031T-E/OTVAO Microchip

MCP6031/2/3/4 0.9 A, High Precision Op Amps Features Description Rail-to-Rail Input and Output The Microchip Technology Inc. MCP6031/2/3/4 family of operational amplifiers (op amps) operate with a Low Offset Voltage: 150 V (maximum) single supply voltage as low as 1.8V, while drawing Ultra Low Quiescent Current: 0.9 A (typical) ultra low quiescent current per amplifier (0.9A, Wide Power Supply Voltage: 1.8V to 5.5V typical). This family also has low input offset voltage Gain Bandwidth Product: 10 kHz (typical) (150 V, maximum) and rail-to-rail input and output Unity Gain Stable operation. This combination of features supports battery-powered and portable applications. Chip Select (CS) capability: MCP6033 Extended Temperature Range: The MCP6031/2/3/4 family is unity gain stable and has a gain bandwidth product of 10 kHz (typical). These - -40C to +125C specs make these op amps appropriate for low fre- No Phase Reversal quency applications, such as battery current monitoring and sensor conditioning. Applications The MCP6031/2/3/4 family is offered in single Toll Booth Tags (MCP6031), single with power saving Chip Select (CS) Wearable Products input (MCP6033), dual (MCP6032), and quad (MCP6034) configurations. Battery Current Monitoring Sensor Conditioning The MCP6031/2/3/4 family is designed with Micro- Battery Powered chips advanced CMOS process. All devices are available in the extended temperature range, with a power supply range of 1.8V to 5.5V. Design Aids SPICE Macro Models Package Types Software FilterLab MCP6031 MCP6033 Mindi Circuit Designer & Simulator DFN, SOIC, MSOP DFN, SOIC, MSOP MAPS (Microchip Advanced Part Selector) NC NC NC CS 1 8 1 8 Analog Demonstration and Evaluation Boards V 2 7 V V 2 7 V IN DD IN DD Application Notes V + 3 6 V V + 3 6 V IN OUT IN OUT V 4 5 NC V 4 5 NC SS SS Typical Application MCP6031 MCP6034 I V DD DD SOT-23-5 SOIC, TSSOP 1.4V V V 1 14 OUTD 10 V 1 5 V OUTA OUT DD to V V OUT V 2 13 2 IND V INA 5.5V SS MCP6031 V + V + 3 12 V + 3 4 V INA IND 100 k IN IN V V 4 11 SS DD 1M MCP6032 5 10 V + V + INC INB SOIC, MSOP V 6 9 V INB INC V V 1 8 DD V V OUTA 7 8 V V DD OUT OUTC OUTB I = ------------------------------------------ DD 2 7 V V ()10 V/V ()10 OUTB INA V + 3 6 V INA INB High Side Battery Current Sensor V + V 4 5 INB SS 2008 Microchip Technology Inc. DS22041B-page 1MCP6031/2/3/4 Notice: Stresses above those listed under Absolute 1.0 ELECTRICAL Maximum Ratings may cause permanent damage to CHARACTERISTICS the device. This is a stress rating only and functional operation of the device at those or any other conditions Absolute Maximum Ratings above those indicated in the operational listings of this specification is not implied. Exposure to maximum rat- V V ........................................................................7.0V DD SS ing conditions for extended periods may affect device Current at Input Pins .....................................................2 mA reliability. Analog Inputs (V +, V -) .......... V 1.0V to V + 1.0V IN IN SS DD See 4.1.2 Input Voltage And Current Limits All Other Inputs and Outputs ......... V 0.3V to V + 0.3V SS DD Difference Input Voltage ...................................... V V DD SS Output Short-Circuit Current .................................continuous Current at Output and Supply Pins ............................30 mA Storage Temperature.....................................-65C to +150C Maximum Junction Temperature (T )..........................+150C J ESD protection on all pins (HBM MM) ................ 4 kV 400V DC ELECTRICAL SPECIFICATIONS Electrical Characteristics: Unless otherwise indicated, V = +1.8V to +5.5V, V =GND, T = +25C, V = V /2, DD SS A CM DD V V /2, V = V /2, R = 1 M to V and CS is tied low. (Refer to Figure 1-2 and Figure 1-3). OUT DD L DD L L Parameters Sym Min Typ Max Units Conditions Input Offset Input Offset Voltage V -150 +150 V V = 3.0V, V = V /3 OS DD CM DD Input Offset Drift with Temperature V /T 3.0 V/C T = -40C to +125C, OS A A V = 3.0V, V = V /3 DD CM DD Power Supply Rejection Ratio PSRR 70 88 dB V = V CM SS Input Bias Current and Impedance Input Bias Current I 1.0 100 pA B I 60 pAT = +85C B A I 2000 5000 pA T = +125C B A Input Offset Current I 1.0 pA OS 13 Common Mode Input Impedance Z 10 6 pF CM 13 Differential Input Impedance Z 10 6 pF DIFF Common Mode Common Mode Input Voltage V V 0.3 V + 0.3 V CMR SS DD Range Common Mode Rejection Ratio CMRR 70 95 dB V = -0.3V to 2.1V, CM V = 1.8V DD 72 93 dB V = -0.3V to 5.8V, CM V = 5.5V DD 70 89 dB V = 2.75V to 5.8V, CM V = 5.5V DD 72 93 dB V = -0.3V to 2.75V, CM V = 5.5V DD Open-Loop Gain DC Open-Loop Gain A 95 115 dB 0.2V < V < (V 0.2V) OL OUT DD (Large Signal) R = 50 k to V L L DS22041B-page 2 2008 Microchip Technology Inc.