MCP6294-E/P Microchip

+ + MCP6291/1R/2/3/4/5 1.0 mA, 10 MHz Rail-to-Rail Op Amp Mindi Simulation Tool Features MAPS (Microchip Advanced Part Selector) Gain Bandwidth Product: 10 MHz (typical) Analog Demonstration and Evaluation Boards Supply Current: I = 1.0 mA Q Application Notes Supply Voltage: 2.4V to 6.0V Rail-to-Rail Input/Output Description Extended Temperature Range: -40C to +125C The Microchip Technology Inc. MCP6291/1R/2/3/4/5 Available in Single, Dual and Quad Packages family of operational amplifiers (op amps) provide wide High Temperature Range: bandwidth for the current. This family has a 10 MHz -40C to +150C Gain Bandwidth Product (GBWP) and a 65 phase margin. This family also operates from a single supply Single with CS (MCP6293) voltage as low as 2.4V, while drawing 1 mA (typical) Dual with CS (MCP6295) quiescent current. In addition, the MCP6291/1R/2/3/4/5 Applications supports rail-to-rail input and output swing, with a + 300 mV to Common-mode input voltage range of V Automotive (see Product Identification System DD (Automotive)) V 300 mV. This family of operational amplifiers is SS designed with Microchips advanced CMOS process. - AEC-Q100 Qualified. Grade 1. The MCP6295 has a Chip Select (CS) input for dual op - AEC-Q100 Qualified, Grade 0 (MCP6292 amps in an 8-pin package. This device is manufactured H-Temp) by cascading the two op amps, with the output of Portable Equipment op amp A being connected to the noninverting input of Photodiode Amplifier op amp B. The CS input puts the device in a Low-power Analog Filters mode. Notebooks and PDAs The MCP6291/1R/2/3/4/5 family operates over the Battery-Powered Systems extended temperature range of -40C to +125C. The MCP6292 H-Temp part is available in the 8-Lead Design Aids MSOP package and operates over the high SPICE Macro Models temperature range of -40C to +150C. It also has a FilterLab Software power supply range of 2.4V to 6.0V. Package Types MCP6291 MCP6291 MCP6291R MCP6292 PDIP, SOIC, MSOP PDIP, SOIC, MSOP SOT-23-5 SOT-23-5 V NC 1 8 NC OUTA 1 8 V DD V V V V 1 5 DD 1 5 SS OUT OUT V 2 7 V - V 2 7 IN DD - + V INA OUTB V V 2 2 SS DD - + V + V - 3 6 IN OUT V + 3 + - 6 V INA INB V + V V + V 3 4 3 4 IN IN IN IN V 4 5 NC V SS 4 5 V + SS INB MCP6293 MCP6293 MCP6294 MCP6295 PDIP, SOIC, MSOP PDIP, SOIC, TSSOP SOT-23-6 PDIP, SOIC, MSOP NC 1 8 CS V V 1 14 OUTA OUTD V /V + V V 1 8 V 1 6 OUTA INB DD DD OUT V 2 V - 7 IN DD V 2 - + + - 13 V INA IND V - + V CS V 2 7 SS 2 5 INA OUTB + V + - 3 V IN 6 OUT V + 3 12 V + INA IND - V V V + + 6 V + 3 INB 3 4 IN INA IN V 4 5 11 SS NC V 4 V DD SS V 4 5 SS CS 5 10 V + V + INC INB V - + + - INB 6 9 V INC V 8 V OUTB 7 OUTC 2003-2020 Microchip Technology Inc. DS20001812G-page 1 +MCP6291/1R/2/3/4/5 1.0 ELECTRICAL CHARACTERISTICS Absolute Maximum Ratings V V ........................................................................................................................................................................................ 7.0V DD SS Current at Input Pins ..................................................................................................................................................................... 2 mA Analog Inputs (V +, V ) ......................................................................................................................... V 1.0VtoV +1.0V IN IN SS DD All Other Inputs and Outputs .......................................................................................................................... V 0.3V to V +0.3V SS DD Difference Input Voltage ....................................................................................................................................................... V V DD SS Output Short Circuit Current ............................................................................................................................................Continuous Current at Output and Supply Pins ...................................................................................................................................... 30 mA Storage Temperature.....................................................................................................................................................65C to +150C Maximum Junction Temperature (T )...........................................................................................................................................+155C J ESD Protection On All Pins (HBM CDM MM) 4 kV 2 kV 400V Notice: Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only and functional operation of the device at those or any other conditions above those indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability. See Section 4.1.2 Input Voltage and Current Limits. Continuous short circuit at high temperatures may damage the device. See Figure 2-45 for safe operating range. DC ELECTRICAL SPECIFICATIONS Electrical Characteristics: Unless otherwise indicated, T = +25C, V = +2.4V to +5.5V, V = GND, V V /2, A DD SS OUT DD V =V /2, V = V /2, R =10 kto V and CS is tied low (refer to Figure 1-2 and Figure 1-3). CM DD L DD L L Parameters Sym. Min. Typ. Max. Units Conditions Input Offset Input Offset Voltage V 3.0 +3.0 mV V = V (Note 1) OS CM SS Input Offset Voltage V 5.0 +5.0 mV T = -40C to +150C, OS A (High Temperature) V = V (Note 6) CM SS Input Offset Temperature Drift V /T 1.7 V/CT = -40C to +125C, OS A A V = V (Note 1) CM SS Power Supply Rejection Ratio PSRR 70 90 dB V = V (Note 1) CM SS Input Bias, Input Offset Current and Impedance Input Bias Current I 1.0 pA Note 2 B At Temperature I 50 200 pA T = +85C (Note 2) B A At Temperature I 2 5 nAT = +125C (Note 2) B A At Temperature I 15 25nAT = +150C (Note 6) B A Input Offset Current I 1.0 pA Note 3 OS At Temperature I 3.5 1.0 +3.5 nA T = +150C (Note 6) OS A 13 Common-mode Input Impedance Z 10 6 pF Note 3 CM 13 Differential Input Impedance Z 10 3 pF Note 3 DIFF Common-mode (Note 4) Common-mode Input Range V V 0.3 V + 0.3 V CMR SS DD Common-mode Rejection Ratio CMRR 70 85 dB V = -0.3V to 2.5V, V = 5V CM DD Common-mode Rejection Ratio CMRR 65 80 dB V = -0.3V to 5.3V, V = 5V CM DD Open-Loop Gain Note 1: The MCP6295s V for op amp B (pins V /V + and V ) is V + 100 mV. CM OUTA INB INB SS 2: The current at the MCP6295s V pin is specified by I only. INB B 3: This specification does not apply to the MCP6295s V /V + pin. OUTA INB 4: The MCP6295s V pin (op amp B) has a Common-mode range (V ) of V + 100 mV to V 100 mV. INB CMR SS DD The MCP6295s V /V + pin (op amp B) has a voltage range specified by V and V . OUTA INB OH OL 5: All parts with date codes November 2007 and later have been screened to ensure operation at V = 6.0V. However, DD the other minimum and maximum specifications are measured at 2.4V and or 5.5V. 6: This specification at +150C only applies to MCP6292 H-Temp parts. DS20001812G-page 2 2003-2020 Microchip Technology Inc.