MGC3030/3130 MGC3030/3130 3D Tracking and Gesture Controller Data Sheet Introduction Key Features Microchips MGC3X30 are 3D gesture recognition and Recognition of 3D Hand Gestures and x, y, z motion tracking controller chips based on Microchips Positional Data (MGC3130) patented GestIC technology. They enable user- Proximity and Touch Sensing command input with natural hand and finger Built-in Colibri Gesture Suite (running on chip) movements. Applying the principles of electrical near- Advanced 3D Signal Processing Unit field sensing, the MGC3X30 contain all the building Detection Range: 0 to 10 cm blocks to develop robust 3D gesture input sensing Receiver Sensitivity: <1 fF systems. Implemented as a low-power mixed-signal Position Rate: 200 positions/sec configurable controller, they provide a large set of Spatial Resolution: up to 150 dpi smart functional features with integrated signal driver, Carrier Frequency: 44 kHz to 115 kHz a frequency adaptive input path for automatic noise Channels Supported: suppression and a digital signal processing unit. - Five receive (Rx) channels Microchips on-chip Colibri Suite obsoletes processing - One transmit (Tx) channel needs at the host, reduces system power consumption On-chip Auto Calibration resulting in low software development efforts for short Low Noise Radiation due to Low Transmit Voltage time-to-market success. The MGC3XXX family and Slew Rate Control represents a unique solution that provides gesture Noise Susceptibility Reduction: information of the human hand in real time. Dedicated - On-chip analog filtering chip family members add position data, touch or multi - On-chip digital filtering touch information to the free space gesture sensing. - Automatic frequency hopping The MGC3XXX allow the realization of a new Enables the use of Low-Cost Electrode Material generation of user interfaces across various industry including: markets. - Printed circuit board - Conductive paint - Conductive foil Applications - Laser Direct Structuring (LDS) Audio Products - Touch panel ITO structures Notebooks/Keyboards/PC Peripherals Field Upgrade Capability Home Automation Operating Voltage: 3.3V (+/-5%) (single supply) White Goods Temperature Range: -20C to +85C Switches/Industrial Switches Medical Products Peripheral Features Game Controllers 2 Audio Control 1x I C Interface for Configuration and Sensor output streaming Five Gesture Port pins for individual mapping of Power Features gesture to EIOs Variety of Several Power Operation modes include: - Processing mode: 20 mA 3.3V, typical Note: This data sheet applies to parts MGC3030 - Programmable Self Wake-up: 110 A 3.3V and MGC3130. Throughout this - Deep Sleep: 9 A 3.3V, typical document the term MGC3X30 will be representative for these two parts. 2012-2017 Microchip Technology Inc. Advance Information DS40001667E-page 1MGC3030/3130 TABLE 1: MGC3X30 AVAILABLE PACKAGES Part number Available Package Pins Contact/Lead Pitch Dimensions MGC3030 SSOP 28 0.65 7.80x10.50 MGC3130 QFN 28 0.5 5x5 Note: All dimensions are in millimeters (mm) unless specified. TABLE 2: MGC3X30 FEATURE OVERVIEW MGC3030 Yes No Yes No Yes Yes 5 5 1 MGC3130 Yes Yes Yes No Yes Yes 5 5 1 DS40001667E-page 2 Advance Information 2012-2017 Microchip Technology Inc. Gesture Recognition Position Tracking Raw Data Streaming Multi Touch Finger Tracking Wake-up on Approach Deep Sleep Gesture Port Pins Rx Receive Electrodes 2 I C Ports