MIC2025/2075 Micrel, Inc. MIC2025/2075 Single-Channel Power Distribution Switch MM8 General Description Features The MIC2025 and MIC2075 are high-side MOSFET switches 140m maximum on-resistance optimized for general-purpose power distribution requiring 2.7V to 5.5V operating range circuit protection. 500mA minimum continuous output current Short-circuit protection with thermal shutdown The MIC2025/75 are internally current limited and have Fault status flag with 3ms filter eliminates false asser - thermal shutdown that protects the device and load. The tions MIC2075 offers smart thermal shutdown that reduces cur- Undervoltage lockout rent consumption in fault modes. When a thermal shutdown Reverse current flow blocking (no body diode) fault occurs, the output is latched off until the faulty load is Circuit breaker mode (MIC2075) reduces power removed. Removing the load or toggling the enable input will consumption reset the device output. Logic-compatible input Both devices employ soft-start circuitry that minimizes inrush Soft-start circuit current in applications where highly capacitive loads are em- Low quiescent current ployed. A fault status output flag is provided that is asserted Pin-compatible with MIC2525 during overcurrent and thermal shutdown conditions. UL File E179633 The MIC2025/75 is available in the MM8 8-lead MSOP and 8-lead SOP. Applications USB peripherals General purpose power switching ACPI power distribution Notebook PCs PDAs PC card hot swap Typical Application V CC 2.7V to 5.5V 10k Logic Controller MIC2025/75 VIN ON/OFF EN OUT Load OVERCURRENT FLG IN 1F GND GND OUT NC NC 0.1F UL Recognized Component MM8 is a registered trademark of Micrel, Inc. Micrel, Inc. 2180 Fortune Drive San Jose, CA 95131 USA tel + 1 (408) 944-0800 fax + 1 (408) 474-1000 MIC2025/2075 Micrel, Inc. Ordering Information Part Number Enable Temperature Range Package Standard Pb-Free MIC2025-1BM MIC2025-1YM Active High -40C to +85C 8-Lead SOIC MIC2025-2BM MIC2025-2YM Active Low -40C to +85C 8-Lead SOIC MIC2025-1BMM MIC2025-1YMM Active High -40C to +85C 8-Pin MSOP MIC2025-2BMM MIC2025-2YMM Active Low -40C to +85C 8-Pin MSOP MIC2075-1BM MIC2075-1YM Active High -40C to +85C 8-Lead SOIC MIC2075-2BM MIC2075-2YM Active Low -40C to +85C 8-Lead SOIC MIC2075-1BMM MIC2075-1YMM Active High -40C to +85C 8-Pin MSOP MIC2075-2BMM MIC2075-2YMM Active Low -40C to +85C 8-Pin MSOP Pin Configuration MIC2025/75 EN 1 8 OUT FLG 2 7 IN GND 3 6 OUT NC 4 5 NC 8-Lead SOIC (BM) 8-Lead MSOP (BMM) Pin Description Pin Number Pin Name Pin Function 1 EN Switch Enable (Input): Active-high (-1) or active-low (-2). 2 FLG Fault Flag (Output): Active-low, open-drain output. Indicates overcurrent or thermal shutdown conditions. Overcurrent condition must exceed t in order D to assert FLG. 3 GND Ground 4 NC not internally connected 5 NC not internally connected 6, 8 OUT Supply (Output): Pins must be connected together. 7 IN Supply Voltage (Input). MIC2025/2075 2 June 2010