MIC2606YML-TR Microchip

MIC2605/6 0.5A, 1.2MHz / 2MHz Wide Input Range Boost Regulator with Integrated Switch and Schottky Diode General Description Features The MIC2605/6 is a 1.2MHz/2MHz, PWM DC/DC boost Wide input voltage range: 4.5V to 20V switching regulator available in a 2mm x 2mm MLF Output voltage adjustable to 40V package. High power density is achieved with the 0.5A switch current and schottky diode MIC2605/6s internal 40V/0.5A switch and schottky diode, MIC2605 operates at 1.2MHz allowing it to power large loads in a tiny footprint. MIC2606 operates at 2MHz The MIC2605/6 implements constant frequency Programmable soft start 1.2MHz/2MHz PWM current mode control. The MIC2605/6 Stable with small size ceramic capacitors offers internal compensation that offers excellent transient High efficiency response and output regulation performance. The high frequency operation saves board space by allowing small, Low input and output ripple low-profile external components. The fixed frequency <10A shutdown current PWM scheme also reduces spurious switching noise and UVLO ripple to the input power source. Output over-voltage and over-temperature protection The MIC2605/6 is available in an 8-pin 2mm x 2mm MLF 8-pin 2mm x 2mm MLF package leadless package. This package has an output over- 40 C to +125 C junction temperature range voltage protection feature. The MIC2605/6 has an operating junction temperature Applications range of 40 C to +125 C. TV-tuners Data sheets and support documentation can be found on Micrels web site at www.micrel.com. Broadband communications TFT-LCD bias supplies Bias supply Positive output regulators SEPIC converters DSL applications Local boost regulators Typical Application 10H 32V Efficiency OUT V OUT 90 32V, 30mA 80 MIC2605/6 12.4K 70 VIN SW 60 OUT V = 12V IN EN FB 50 1F 1F 40 VDD 30 SS PGND 499 0.1F 20 0.1F 10 V IN = 12V 0 20 40 60 80 100 120 LOAD CURRENT (mA) MLF and MicroLeadFrame are registered trademarks of Amkor Technology, Inc. Micrel Inc. 2180 Fortune Drive San Jose, CA 95131 USA tel +1 (408) 944-0800 fax + 1 (408) 474-1000 Micrel, Inc. MIC2605/6 Ordering Information (2) Part Number Marking Frequency Output Over Temperature Range Package Lead Finish (1) Code Voltage Protection MIC2605YML WZ5 1.2MHz 40V 40 to +125C 8-Pin 2mm x 2mm MLF Pb-Free MIC2606YML WZ6 2MHz 40V 40 to +125C 8-Pin 2mm x 2mm MLF Pb-Free Notes 1. Overbar ( ) symbol my not be to scale. 2. MLF is a GREEN RoHS compliant package. Lead finish is NiPdAu. Mold compound is Halogen Free. Pin Configuration VOUT 1 8 PGND VIN 2 7 SW VDD 3 6 FB EN 4 5 SS 8-Pin 2mm x 2mm MLF (ML) Pin Description Pin Number Pin Name Pin Function 1 VOUT Output Pin: Connect to the output capacitor. 2 VIN Supply (Input): 4.5V to 20V input voltage. 3 VDD Internal regulated supply. VDD should be connected to VIN when VIN 7V. 4 EN Enable (Input): Logic high enables regulator. Logic low shuts down regulator. 5 SS Soft start 6 FB Feedback (Input): 1.25V output voltage sense node. V = 1.25V (1 + R1/R2). OUT 7 SW Switch Node (Input): Internal power BIPOLAR collector. 8 PGND Power ground EP EPAD Exposed backside pad for thermal cooling. M9999-090909-B September 2009 2