MIC2860-2DYD6 Microchip

MIC2860-D High Efficiency 2 Channel WLED Driver with Single Wire Digital Control General Description Features The MIC2860-2D is a high efficiency White LED (WLED) High Efficiency (no switching losses) driver designed to drive two WLEDs and greatly extend No charge pumps battery life for portable display backlighting, and keypad 2 WLED driver channels backlighting in low cost mobile devices. The MIC2860-2D Single wire digital control architecture provides the highest possible efficiency by Input voltage range: 3.0V to 5.5V eliminating switching losses present in traditional charge pumps or inductive boost circuits. It features a typical WLED driver dropout of 52mV at 30.2mA dropout of 52mV at 30.2mA per channel. This allows the Matching better than 0.5% (typical) WLEDs to be driven directly from the battery eliminating Current Accuracy better than 1.0% (typical) switching noise and losses present with the use of boost Available in Thin SOT-23 and SC-70 6 pin packages circuitry. The two channels have better than 0.5% matching, which Applications ensures uniform display illumination under all conditions. The WLEDs brightness is externally preset by a resistor Mobile handsets and dimmed using a single wire digital control signal. The Digital cameras MIC2860-2D single wire digital interface accepts digital Portable media/MP3 players programming pulses providing 32 dimming steps. Portable navigation devices (GPS) The MIC2860-2D is available in Thin SOT-23 and SC-70 six pin packages with a junction temperature range of Portable applications -40C to +125 C. Datasheets and support documentation can be found on Micrels web site at: www.micrel.com. Typical Application LCD Display Backlight with 2 WLEDs Micrel Inc. 2180 Fortune Drive San Jose, CA 95131 USA tel +1 (408) 944-0800 fax + 1 (408) 474-1000 Micrel Inc. MIC2860-2D Ordering Information (1) (2) Part Number Mark Code Temperature Range Package MIC2860-2DYC6 62D 40C to +85C 6-Pin SC-70 MIC2860-2DYD6 602D 40C to +85C 6-Pin Thin SOT-23 Note: 1. Under bar symbol ( ) may not be to scale. 2. Package is GREEN RoHS compliant. Lead finish is NiPdAu. Mold compound is halogen free. Pin Configuration 6-Pin SC-70 (C6) 6-Pin Thin SOT-23 (D6) (Top View) (Top View) Pin Description Pin Number Pin Name Pin Function MIC2860-2D 1 SC Serial Control Digital input. Do not leave floating. 2 GND Ground. 3 VIN Voltage Input. Connect at least 1F ceramic capacitor between VIN and GND. (1) 4 D2 LED2 driver. Connect LED anode to VIN and cathode to this pin. Do not leave floating. 5 RSET Connect an external resistor from this pin to GND to set the maximum LED current. Example, apply a 9.53k resistor between RSET and GND to set LED current to 30mA at 100% duty cycle. (1) D1 6 LED1 driver. Connect LED anode to VIN and cathode to this pin. Do not leave floating. Note 1. When driving only 1 LED, connect D1 and D2 in parallel to the LED cathode and adjust the RSET resistor for half the desired output. M9999-072010-A July 2010 2