MIC4101YM Microchip

MIC4100/1 100V Half Bridge MOSFET Drivers General Description Features The MIC4100/1 are high frequency, 100V Half Bridge Bootstrap supply max voltage to 118V DC MOSFET driver ICs featuring fast 30ns propagation delay Supply voltage up to 16V times. The low-side and high-side gate drivers are Drives high- and low-side N-Channel MOSFETs with independently controlled and matched to within 3ns independent inputs typical. The MIC4100 has CMOS input thresholds, and the CMOS input thresholds (MIC4100) MIC4101 has TTL input thresholds. The MIC4100/1 include a high voltage internal diode that charges the high- TTL input thresholds (MIC4101) side gate drive bootstrap capacitor. On-chip bootstrap diode Fast 30ns propagation times A robust, high-speed, and low power level shifter provides clean level transitions to the high side output. The robust Drives 1000pF load with 10ns rise and fall times operation of the MIC4100/1 ensures the outputs are not Low power consumption affected by supply glitches, HS ringing below ground, or Supply under-voltage protection HS slewing with high speed voltage transitions. Under- 3 pull up , 3 pull down output resistance voltage protection is provided on both the low-side and high-side drivers. Space saving SOIC-8L package 40C to +125C junction temperature range The MIC4100 is available in the SOIC-8L package with a junction operating range from 40C to +125C. Applications Data sheets and support documentation can be found on Micrels web site at www.micrel.com. High voltage buck converters Push-pull converters Full- and half-bridge converters Active clamp forward converters Typical Application 9V to 16V Bias 100V Supply VDD HB MIC4100 HI SO-8 PWM HO V OUT Controller HS LI GND LO 100V Buck Regulator Solution Micrel Inc. 2180 Fortune Drive San Jose, CA 95131 USA tel +1 (408) 944-0800 fax + 1 (408) 474-1000 Micrel, Inc. MIC4100/1 Ordering Information Part Number Standard Pb-Free Input Junction Temp. Range Package MIC4100BM MIC4100YM CMOS 40 to +125C SOIC-8L MIC4101BM MIC4101YM TTL 40 to +125C SOIC-8L Pin Configuration VDD 1 8LO HB 2 7 VSS HO 3 6 LI HS 4 5 HI SOIC-8L (M) Pin Description Pin Number Pin Name Pin Function 1 VDD Positive Supply to lower gate drivers. Decouple this pin to VSS (Pin 7). Bootstrap diode connected to HB (pin 2). 2 HB High-Side Bootstrap supply. External bootstrap capacitor is required. Connect positive side of bootstrap capacitor to this pin. Bootstrap diode is on-chip. 3 HO High-Side Output. Connect to gate of High-Side power MOSFET. 4 HS High-Side Source connection. Connect to source of High-Side power MOSFET. Connect negative side of bootstrap capacitor to this pin. 5 HI High-Side input. 6 LI Low-Side input. 7 VSS Chip negative supply, generally will be ground. 8 LO Low-Side Output. Connect to gate of Low-Side power MOSFET. March 2006 2 M9999-031506