MIC4426/4427/4428 Micrel, Inc. MIC4426/4427/4428 Dual 1.5A-Peak Low-Side MOSFET Driver General Description Features The MIC4426/4427/4428 family are highly-reliable dual low- Bipolar/CMOS/DMOS construction side MOSFET drivers fabricated on a BiCMOS/DMOS process Latch-up protection to >500mA reverse current for low power consumption and high efciency. These drivers 1.5A-peak output current translate TTL or CMOS input logic levels to output voltage 4.5V to 18V operating range levels that swing within 25mV of the positive supply or ground. Low quiescent supply current Comparable bipolar devices are capable of swinging only 4mA at logic 1 input to within 1V of the supply. The MIC4426/7/8 is available in 400A at logic 0 input three congurations: dual inverting, dual noninverting, and Switches 1000pF in 25ns one inverting plus one noninverting output. Matched rise and rall times 7 output impedance The MIC4426/4427/4428 are pin-compatible replacements <40ns typical delay for the MIC426/427/428 and MIC1426/1427/1428 with im- Logic-input threshold independent of supply voltage proved electrical performance and rugged design (Refer to Logic-input protection to 5V the Device Replacement lists on the following page). They 6pF typical equivalent input capacitance can withstand up to 500mA of reverse current (either polarity) 25mV max. output offset from supply or ground without latching and up to 5V noise spikes (either polarity) Replaces MIC426/427/428 and MIC1426/1427/1428 on ground pins. Dual inverting, dual noninverting, and inverting/ Primarily intended for driving power MOSFETs, MIC4426/7/8 noninverting congurations drivers are suitable for driving other loads (capacitive, resistive, ESD protection or inductive) which require low-impedance, high peak current, and fast switching time. Other applications include driving Applications heavily loaded clock lines, coaxial cables, or piezoelectric MOSFET driver transducers. The only load limitation is that total driver power Clock line driver dissipation must not exceed the limits of the package. Coax cable driver Note See MIC4126/4127/4128 for high power and narrow Piezoelectic transducer driver pulse applications. Functional Diagram V S INVERTING 0.6mA 0.1mA OUTA INA 2k NONINVERTING INVERTING 0.6mA 0.1mA OUTB INB 2k NONINVERTING GND Micrel, Inc. 2180 Fortune Drive San Jose, CA 95131 USA tel + 1 (408) 944-0800 fax + 1 (408) 474-1000 MIC4426/4427/4428 Micrel, Inc. Ordering Information Part Number Temperature Standard Pb-Free Range Package Conguration MIC4426BM MIC4426YM 40C to +85C 8-Pin SOIC Dual Inverting MIC4426CM MIC4426ZM 0C to +70C 8-Pin SOIC Dual Inverting MIC4426BMM MIC4426YMM 40C to +85C 8-Pin MSOP Dual Inverting MIC4426BN MIC4426YN 40C to +85C 8-Pin PDIP Dual Inverting MIC4426CN MIC4426ZN 0C to +70C 8-Pin PDIP Dual Inverting MIC4427BM MIC4427YM 40C to +85C 8-Pin SOIC Dual Non-Inverting MIC4427CM MIC4427ZM 0C to +70C 8-Pin SOIC Dual Non-Inverting MIC4427BMM MIC4427YMM 40C to +85C 8-Pin MSOP Dual Non-Inverting MIC4427BN MIC4427YN 40C to +85C 8-Pin PDIP Dual Non-Inverting MIC4427CN MIC4427ZN 0C to +70C 8-Pin PDIP Dual Non-Inverting MIC4428BM MIC4428YM 40C TO +85C 8-Pin SOIC Inverting + Non-Inverting MIC4428CM MIC4428ZM 0C to +70C 8-Pin SOIC Inverting + Non-Inverting MIC4428BMM MIC4428YMM 40C to +85C 8-Pin MSOP Inverting + Non-Inverting MIC4428BN MIC4428YN 40C to +85C 8-Pin PDIP Inverting + Non-Inverting MIC4428CN MIC4428ZN 0C to +70C 8-Pin PDIP Inverting + Non-Inverting Note DESC standard military drawing 5962-88503 available MIC4426, CERDIP 8-Pin SMD : 5962-8850307PA Micrel Part Number: 5952-8850307PA MIC4427, CERDIP 8-Pin SMD : 5962-8850308PA Micrel Part Number: 5952-8850308PA MIC4428, CERDIP 8-Pin SMD : 5962-8850309PA Micrel Part Number: 5952-8850309PA MIC426/427/428 Device Replacement MIC1426/1427/1428 Device Replacement Discontinued Number Replacement Discontinued Number Replacement MIC426CM MIC4426BM MIC1426CM MIC4426BM MIC426BM MIC4426BM MIC1426BM MIC4426BM MIC426CN MIC4426BN MIC1426CN MIC4426BN MIC426BN MIC4426BN MIC1426BN MIC4426BN MIC427CM MIC4427BM MIC1427CM MIC4427BM MIC427BM MIC4427BM MIC1427BM MIC4427BM MIC427CN MIC4427BN MIC1427CN MIC4427BN MIC427BN MIC4427BN MIC1427BN MIC4427BN MIC428CM MIC4428BM MIC1428CM MIC4428BM MIC428BM MIC4428BM MIC1428BM MIC4428BM MIC428CN MIC4428BN MIC1428CN MIC4428BN MIC428BN MIC4428BN MIC1428BN MIC4428BN M9999-042108 2 April 2008