MIC49300-1.2WR-TR Microchip

MIC49300 3A Low Voltage LDO Regulator with Dual Input Voltages General Description Features The MIC49300 is a high-bandwidth, low-dropout, 3.0A Input voltage range: voltage regulator ideal for powering core voltages of low- V : 1.4V to 6.5V IN power microprocessors. The MIC49300 implements a dual V : 3.0V to 6.5V BIAS supply conguration allowing for very low output Stable with 1F ceramic capacitor impedance and very fast transient response. 1% initial tolerance The MIC49300 requires a bias input supply and a main Maximum dropout voltage (V V ) of 500mV over IN OUT input supply, allowing for ultra-low input voltages on the temperature main supply rail. The input supply operates from 1.4V to Adjustable output voltage down to 0.9V 6.5V and the bias supply requires between 3V and 6.5V for proper operation. The MIC49300 offers xed output Ultra-fast transient response (up to 10MHz bandwidth) voltages from 0.9V to 1.8V and adjustable output voltages Excellent line and load regulation specifications down to 0.9V. Logic controlled shutdown option The MIC49300 requires a minimum of output capacitance Thermal shutdown and current limit protection for stability, working optimally with small ceramic Power S-Pak package capacitors. Junction temperature range of 40C to +125C The MIC49300 is available in a 5-pin S-Pak. It operates over a junction temperature range of 40C to +125C. Applications Datasheets and support documentation are available on Graphics processors Micrels web site at: www.micrel.com. PC add-in cards Microprocessor core voltage supply Low voltage digital ICs High efficiency linear power supplies SMPS post regulators Typical Application Micrel Inc. 2180 Fortune Drive San Jose, CA 95131 USA tel +1 (408) 944-0800 fax + 1 (408) 474-1000 Micrel, Inc. MIC49300 Ordering Information (1, 2) Part Number Output Current Voltage Temperature Range Package MIC49300-0.9WR 3A 0.9V 40 to +125C S-PAK-5 MIC49300-1.2WR 3A 1.2V 40 to +125C S-PAK-5 MIC49300-1.5WR 3A 1.5V 40 to +125C S-PAK-5 MIC49300-1.8WR 3A 1.8V 40 to +125C S-PAK-5 MIC49300WR 3A Adj. 40 to +125C S-PAK-5 Note: 1. Other voltages are available. Contact Micrel for details. 2. RoHS-compliant with high-melting solder exemption. Pin Configuration 5-Pin S-Pak (R) Pin Description Pin Number Pin Name Pin Function EN Enable (input): CMOS-compatible input. Logic high = enable, logic low = shutdown. 1 ADJ Adjustable regulator feedback input. Connect to resistor voltage divider. Input bias voltage for powering all circuitry on the regulator with the exception of the output power 2 VBIAS device. 3 GND Ground (TAB is connected to ground on S-Pak). 4 VIN Input voltage that supplies current to the output power device. 5 VOUT Regulator output. Revision 3.0 January 22, 2014 2