MIC5205-3.6YM5-TR Microchip

MIC5205 150mA Low-Noise LDO Regulator General Description Features The MIC5205 is an efficient linear voltage regulator with Ultra-low-noise output ultra low-noise output, very low dropout voltage (typically High output voltage accuracy 17mV at light loads and 165mV at 150mA), and very low Guaranteed 150mA output ground current (600A at 100mA output). The MIC5205 Low quiescent current offers better than 1% initial accuracy. Low dropout voltage Designed especially for hand-held, battery-powered Extremely tight load and line regulation devices, the MIC5205 includes a CMOS or TTL compatible enable/shutdown control input. When shut down, power Very low temperature coefficient consumption drops nearly to zero. Regulator ground Current and thermal limiting current increases only slightly in dropout, further Reverse-battery protection prolonging battery life. Zero off-mode current Key MIC5205 features include a reference bypass pin to Logic-controlled electronic enable improve its already excellent low-noise performance, reversed-battery protection, current limiting, and overtemperature shutdown. Applications The MIC5205 is available in fixed and adjustable output Cellular telephones voltage versions in a small SOT-23-5 package. Laptop, notebook, and palmtop computers For low-dropout regulators that are stable with ceramic Battery-powered equipment output capacitors, see the Cap MIC5245/6/7 family. CC and VPP regulation/switching PCMCIA V Data sheets and support documentation can be found on Micrels web site at www.micrel.com. Consumer/personal electronics SMPS post-regulator/dc-to-dc modules High-efficiency linear power supplies Typical Application Ultra-Low-Noise Regulator Application Xxxxx is a trademark of Micrel, Inc Xxxxx is a registered trademark of Micrel, Inc. Micrel Inc. 2180 Fortune Drive San Jose, CA 95131 USA tel +1 (408) 944-0800 fax + 1 (408) 474-1000 Micrel MIC5205 Ordering Information Part Number Marking Accuracy Voltage Temperature Package (1) Standard Pb-Free Standard Pb-Free MIC5205BM5 MIC5205YM5 LBAA KBAA 1% Adj 40C to +125C SOT-23-5 MIC5205-2.5BM5 MIC5205-2.5YM5 LB25 KB25 1% 2.5V 40C to +125C SOT-23-5 MIC5205-2.7BM5 MIC5205-2.7YM5 LB27 KB27 1% 2.7V 40C to +125C SOT-23-5 MIC5205-2.8BM5 MIC5205-2.8YM5 LB28 KB28 1% 2.8V 40C to +125C SOT-23-5 MIC5205-2.85BM5 MIC5205-2.85YM5 LB2J KB2J 1% 2.85V 40C to +125C SOT-23-5 MIC5205-2.9BM5 MIC5205-2.9YM5 LB29 KB29 1% 2.9V 40C to +125C SOT-23-5 MIC5205-3.0BM5 MIC5205-3.0YM5 LB30 KB30 1% 3.0V 40C to +125C SOT-23-5 MIC5205-3.1BM5 MIC5205-3.1YM5 LB31 KB31 1% 3.1V 40C to +125C SOT-23-5 MIC5205-3.2BM5 MIC5205-3.2YM5 LB32 KB32 1% 3.2V 40C to +125C SOT-23-5 MIC5205-3.3BM5 MIC5205-3.3YM5 LB33 KB33 1% 3.3V 40C to +125C SOT-23-5 MIC5205-3.6BM5 MIC5205-3.6YM5 LB36 KB36 1% 3.6V 40C to +125C SOT-23-5 MIC5205-3.8BM5 MIC5205-3.8YM5 LB38 KB38 1% 3.8V 40C to +125C SOT-23-5 MIC5205-4.0BM5 MIC5205-4.0YM5 LB40 KB40 1% 4.0V 40C to +125C SOT-23-5 MIC5205-5.0BM5 MIC5205-5.0YM5 LB50 KB50 1% 5.0V 40C to +125C SOT-23-5 Note: 1. Underbar ( ) symbol may not be to scale. Pin Configuration MIC5205-x.xBM5/YM5 MIC5205BM5/YM5 Fixed Voltages Adjustable Voltages Pin Description MIC5205-x.x MIC5205 Pin Name Pin Function (fixed) (adjustable) 1 1 IN Supply Input 2 2 GND Ground 3 3 EN Enable/Shudown (Input): CMOS compatible input. Logic high = enable, logic low or open = shutdown 4 BYP Reference Bypass: Connect external 470pF capacitor to GND to reduce output noise. May be left open. 4 ADJ Adjust (Input): Adjustable regulator feedback input. Connect to resistor voltage divider. 5 5 OUT Regulator Ouput M9999-020806 February 2006 2 (408) 955-1690