MIC5216 500mA-Peak Output LDO Regulator General Description Features The MIC5216 is an efficient linear voltage regulator with Error Flag indicates undervoltage fault high peak output current capability, very low dropout Guaranteed 500mA-peak output over the full operating voltage, and better than 1% output voltage accuracy. temperature range Dropout is typically 10mV at light loads and less than Low 500mV maximum dropout voltage at full load 500mV at full load. Extremely tight load and line regulation The MIC5216 is designed to provide a peak output current Tiny SOT-23-5 and MM8 power MSOP-8 package for startup conditions where higher inrush current is Low-noise output demanded. It features a 500mA peak output rating. Low temperature coefficient Continuous output current is limited only by package and layout. Current and thermal limiting Reversed input polarity protection The MIC5216 has an internal undervoltage monitor with a flag output. It also can be enabled or shutdown by a CMOS/TTL-compatible enable/shutdown control CMOS or TTL compatible signal. When disabled, power Near-zero shutdown current consumption drops nearly to zero. Dropout ground current is minimized to help prolong battery life. Other key features Applications include reversed-battery protection, current limiting, overtemperature shutdown, and low noise performance. Laptop, notebook, and palmtop computers The MIC5216 is available in fixed output voltages in Cellular telephones and battery-powered equipment space-saving SOT-23-5 and MM8 8-pin power MSOP Consumer and personal electronics packages. For higher power requirements see the PC Card V and V regulation and switching CC PP MIC5209 or MIC5237. SMPS post-regulator/dc-to-dc modules Data sheets and support documentation can be found on High-efficiency linear power supplies Micrels web site at www.micrel.com. Typical Application 5V Low-Noise Regulator 3.3V Low-Noise Regulator MM8 and Micrel Mini 8 are trademarks of Micrel, Inc. Micrel Inc. 2180 Fortune Drive San Jose, CA 95131 USA tel +1 (408) 944-0800 fax + 1 (408) 474-1000 Micrel, Inc. MIC5216 Ordering Information Part Number Junction Voltage Package Temp. Range Standard Marking Pb-Free Marking MIC5216-2.5BMM MIC5216-2.5YMM 2.5V 40 to +125C 8-Pin MSOP MIC5216-3.3BMM MIC5216-3.3YMM 3.3V 40 to +125C 8-Pin MSOP MIC5216-5.0BMM MIC5216-5.0YMM 5.0V 40 to +125C 8-Pin MSOP MIC5216-2.5BM5 LH25 MIC5216-2.5YM5 LH25 2.5V 40 to +125C 5-Pin SOT-23 MIC5216-3.3BM5 LH33 MIC5216-3.3YM5 LH33 3.3V 40 to +125C 5-Pin SOT-23 MIC5216-3.6BM5 LH36 MIC5216-3.6YM5 LH36 3.6V 40 to +125C 5-Pin SOT-23 MIC5216-5.0BM5 LH50 MIC5216-5.0YM5 LH50 5.0V 40 to +125C 5-Pin SOT-23 M9999-032307 March 2007 2