MIC5301 Single, 150mA Cap ULDO General Description Features The MIC5301 is a high performance, single output Ultra low dropout voltage 40mV 150mA ultra low LDO (ULDO) regulator, offering low total Input voltage range: 2.3V to 5.5V output noise. The MIC5301 is capable of sourcing 150mA guaranteed output current 150mA output current and offers high PSRR and low Stable with ceramic output capacitors output noise, making it an ideal solution for RF applications. Ultra low output noise 30Vrms Low quiescent current 85A total For battery operated applications, the MIC5301 offers 2% accuracy, extremely low dropout voltage (40mV High PSRR up to 75dB 1kHz 150mA), and low ground current (typically 85A total). 35s turn-on time The MIC5301 can also be put into a zero-off-mode High output accuracy current state, drawing no current when disabled. 2% initial accuracy The MIC5301 is available in the 1.6mm x 1.6mm Thin 2 3% over temperature MLF package, occupying only 2.56mm of PCB area, a 36% reduction in board area compared to SC-70 Thermal shutdown and current limit protection and 2mm x 2mm MLF packages. Tiny 6-pin 1.6mm x 1.6mm Thin MLF leadless The MIC5301 has an operating junction temperature package range of 40C to +125C and is available in fixed and Thin SOT-23-5 package adjustable output voltages in lead-free (RoHS compliant) Thin MLF and Thin SOT-23-5 packages. Data sheets and support documentation can be found Applications on Micrels web site at www.micrel.com. Mobile phones PDAs GPS receivers Portable electronics Digital still and video cameras Typical Application MIC5301-x.xYMT V VIN VOUT IN EN BYP GND 1F 1F 0.01F Portable Application ULDO is a trademark of Micrel, Inc. MLF and MicroLeadFrame are registered trademarks of Amkor Technology, Inc. Micrel Inc. 2180 Fortune Drive San Jose, CA 95131 USA tel +1 (408) 944-0800 fax + 1 (408) 474-1000 Micrel, Inc. MIC5301 Ordering Information Part number Marking Output Temperature Range Package (1) (2) Code Voltage (4) MIC5301-2.85YML 2JC 2.85V 40C to +125C 6-Pin 1.6mm x 1.6mm MLF (4) MIC5301YML CAA ADJ. 40C to +125C 6-Pin 1.6mm x 1.6mm MLF (3,4) MIC5301-1.3YMT 13C 1.3V 40C to +125C 6-Pin 1.6mm x 1.6mm Thin MLF (3,4) MIC5301-1.5YMT 15C 1.5V 40C to +125C 6-Pin 1.6mm x 1.6mm Thin MLF (3,4) MIC5301-1.8YMT 18C 1.8V 40C to +125C 6-Pin 1.6mm x 1.6mm Thin MLF (3,4) MIC5301-2.1YMT 21C 2.1V 40C to +125C 6-Pin 1.6mm x 1.6mm Thin MLF (3,4) MIC5301-2.5YMT 25C 2.5V 40C to +125C 6-Pin 1.6mm x 1.6mm Thin MLF (3,4) MIC5301-2.6YMT 26C 2.6V 40C to +125C 6-Pin 1.6mm x 1.6mm Thin MLF (3,4) MIC5301-2.8YMT 28C 2.8V 40C to +125C 6-Pin 1.6mm x 1.6mm Thin MLF (3,4) MIC5301-2.85YMT 2JC 2.85V 40C to +125C 6-Pin 1.6mm x 1.6mm Thin MLF (3,4) MIC5301-2.9YMT 29C 2.9V 40C to +125C 6-Pin 1.6mm x 1.6mm Thin MLF (3,4) MIC5301-3.0YMT 30C 3.0V 40C to +125C 6-Pin 1.6mm x 1.6mm Thin MLF (3,4) MIC5301-3.3YMT 33C 3.3V 40C to +125C 6-Pin 1.6mm x 1.6mm Thin MLF (3,4) MIC5301-4.6YMT 46C 4.6V 40C to +125C 6-Pin 1.6mm x 1.6mm Thin MLF (3,4) MIC5301YMT CAA ADJ. 40C to +125C 6-Pin 1.6mm x 1.6mm Thin MLF MIC5301-1.3YD5 QC13 1.3V 40C to +125C 5-Pin TSOT-23 MIC5301-1.5YD5 QC15 1.5V 40C to +125C 5-Pin TSOT-23 MIC5301-1.8YD5 QC18 1.8V 40C to +125C 5-Pin TSOT-23 MIC5301-2.1YD5 QC21 2.1V 40C to +125C 5-Pin TSOT-23 MIC5301-2.5YD5 QC25 2.5V 40C to +125C 5-Pin TSOT-23 MIC5301-2.6YD5 QC26 2.6V 40C to +125C 5-Pin TSOT-23 MIC5301-2.8YD5 QC28 2.8V 40C to +125C 5-Pin TSOT-23 MIC5301-2.85YD5 QC2J 2.85V 40C to +125C 5-Pin TSOT-23 MIC5301-2.9YD5 QC29 2.9V 40C to +125C 5-Pin TSOT-23 MIC5301-3.0YD5 QC30 3.0V 40C to +125C 5-Pin TSOT-23 MIC5301-3.3YD5 QC33 3.3V 40C to +125C 5-Pin TSOT-23 MIC5301-4.6YD5 QC46 4.6V 40C to +125C 5-Pin TSOT-23 MIC5301YD5 QCAA ADJ. 40C to +125C 5-Pin TSOT-23 Notes: 1. Under bar / Over bar symbol may not be to scale. 2. Other Voltages available. Contact Micrel for details. 3. Thin MLF Pin 1 indicator = . 4. MLF Thin MLF are GREEN RoHS compliant packages. Lead Finish is NiPdAu. Mold compound is Halogen Free. 2 M9999-042108 April 2008
