MIC5323-2.8YD5-TR Microchip

MIC5323 High PSRR Low Noise 300mA Cap Ultra-Low Dropout LDO Regulator General Description Features The MIC5323 is a high-performance, 300mA LDO regula- Ultra low dropout voltage of 120mV 300mA tor, offering extremely high PSRR and very low noise while Input voltage range: 2.65 to 5.5V consuming low ground current. Stable with ceramic output capacitor Ideal for battery operated applications, the MIC5323 300mA guaranteed output current features 2% accuracy, extremely low dropout voltage Low output noise 20Vrms (120mV 300mA), and low ground current at light load High PSRR, up to 80dB 1kHz (typically 90A). When disabled, the MIC5323 typically Less than 30s turn-on time with C = 0.1F BYP consumes less than 1A. High output accuracy: 2.0% over temperature The MIC5323 is a Cap design operating with small Thermal shutdown protection ceramic output capacitors for stability, thereby reducing Current limit protection required board space and component cost. 6-pin 2mm 2mm Thin MLF package Thin SOT-23-5 package The MIC5323 is available in xed output voltages and adjustable output voltages in the super compact 6-pin 2mm 2mm Thin MLF and thin SOT-23-5 package. Applications Additional voltage options are available. Contact Micrel Cellular phones marketing. Notebook and Tablet Computers Data sheets and support documentation can be found on Fiber optic modules Micrels web site at www.micrel.com. Portable electronics Instrumentation Systems Audio Codec power supplies Typical Application Power Supply Rejection Ratio (C = 0.1F) BYP 0 -10 I = 300mA OUT -20 -30 I = 100mA OUT -40 -50 I = 1mA OUT -60 -70 V = V + 1V -80 IN OUT V = 1.8V OUT -90 -100 1.E+01 1.E+02 1.E+03 1.E+04 1.E+05 1.E+06 FREQUENCY (Hz) MicroLeadFrame and MLF are trademarks of Amkor, Inc. Micrel Inc. 2180 Fortune Drive San Jose, CA 95131 USA tel +1 (408) 944-0800 fax + 1 (408) 474-1000 Micrel, Inc. MIC5323 Ordering Information (1) (2) Part Number Marking Junction (3) Voltage Package (2) Temp. Range MIC5323-1.8YMT 23G 1.8V 40C to +125C 6-Pin 2mm x 2mm Thin MLF MIC5323-2.8YMT 23M 2.8V 40C to +125C 6-Pin 2mm x 2mm Thin MLF MIC5323-3.3YMT 23S 3.3V 40C to +125C 6-Pin 2mm x 2mm Thin MLF MIC5323YMT 23A ADJ 40C to +125C 6-Pin 2mm x 2mm Thin MLF MIC5323-1.8YD5 2318 1.8V 40C to +125C Thin SOT23-5 MIC5323-2.8YD5 2328 2.8V 40C to +125C Thin SOT23-5 MIC5323-3.3YD5 2333 3.3V 40C to +125C Thin SOT23-5 Notes: 1. For other output voltage and/or temperature options, contact Micrel marketing. 2. Underbar/Overbar symbols may not be to scale. 3. Pin 1 identifier for 2x2 Thin MLF is symbol. M9999-110311B November 2011 2