MPLAD15KP51CAE3 Microchip

MPLAD15KP7.0A MPLAD15KP200CA High-Reliability Surface Mount 15,000 Watt screening available in Available reference to Transient Voltage Suppressor MIL-PRF-19500 DESCRIPTION These high power 15 kW rated transient voltage suppressors in a surface mount package are provided with design features to minimize thermal resistance and cumulative heating. Typical applications include lightning and automotive load dump protection. They are particularly effective at meeting the multi-stroke lightning standard RTCA DO-160, section 22 for aircraft design. This efficient low profile package design is offered in standoff voltage selections (V ) of 7 volts to WM 200 volts in either unidirectional or bidirectional construction. Important: For the latest information, visit our website MPLAD15KP7.0A MPLAD15KP200CA o MAXIMUM RATINGS 25 C unless otherwise specified Parameters/Test Conditions Symbol Value Unit Junction and Storage Temperature T and T -55 to +150 C/W J STG (1) Thermal Resistance Junction-to-Ambient R 50 C/W JA Thermal Resistance Junction-to-Case R 0.7 C/W JC (2) P 15,000 W Peak Pulse Power 10/1000 s PP Unidirectional <100 ps t (0 volts to V min) clamping (BR) Bidirectional <5 ns (3) Forward Clamping Voltage 500 Amps V 2.0 V FS (3) Forward Surge Current I 1500 A FSM Solder Temperature 10 s T 260 C SP (5) (1) Steady-State Power dissipation T = 25 C P 2.5 W A D (4) T = 100 C 71 W C Notes: 1. When mounted on FR4 PC board with recommended mounting pad (see pad layout). 2. Also see Figures 1 and 2. With impulse repetition rate (duty factor) of 0.05% or less. 3. At 8.3 ms half-sine wave (unidirectional devices only). 4. Case temperature controlled on heat sink as specified. 5. See MicroNote 134 for derating P when also applying steady-state power. PP MECHANICAL and PACKAGING CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0 TERMINALS: Tin-lead or RoHS compliant annealed matte-tin plating readily solderable per MIL-STD-750, method 2026. MARKING: Body marked with part number POLARITY: For unidirectional devices, the cathode is on the metal backside (package bottom) Available in bulk or custom tape-and-reel packaging TAPE-AND-REEL: Standard per EIA-481-B (add TR suffix to part number). Consult factory for quantities. WEIGHT: Approximately 1 gram See Package Dimensions on last page. PART NOMENCLATURE M PLAD 15K P 7.0 CA (e3) Reliability Level* RoHS Compliance M e3 = RoHS compliant MA Blank = non-RoHS compliant MX MXL Polarity *(see Hirel Non-Hermetic A = Unidirectional Product Portfolio) CA = Bidirectional Package Designation Reverse Standoff Voltage P Rating (W) Plastic PP RF01004, Rev F (5/16/14) 2013 Microsemi Corporation Page 2 of 6