MX555ABD100M000 Ultra-Low Jitter 100MHz HCSL XO ClockWorks FUSION General Description Features The MX555ABD100M000 is an ultra-low phase jitter 100MHz HCSL XO with HCSL output optimized for high line rate PCIe Gen 1/2/3/4/5* compliant applications. Typical phase noise: - 109fs (Integration range: 1MHz-20MHz) Applications 50ppm total frequency stability PCI-Express Gen 1/2/3/4/5 -40C to +85C temperature range High Speed ADC/DAC Industry standard 6-Pin 5mm x 3.2mm LGA Storage package *Internal test Absolute Maximum Ratings Operating Ratings Supply Voltage (VIN)..................................................+4.6V Supply Voltage (VIN).......................+2.375V to +3.63V Lead Temperature (soldering, 10s)..............................260C Ambient Temperature (TA)....................-40C to +85C Case Temperature........................................................115C Junction Thermal Resistance Storage Temperature (T )............................-65C to +125C LGA (T ) Still Air.....................................58C/W S JA ESD Machine Model.....................................................200V ESD Rating (HBM).........................................................2kV Electrical Characteristics VDD = 2.5V 5% or 3.3V 10%, -40C to +85C, outputs terminated with 50 Ohms to VSS. Symbol Parameter Condition Min. Typ. Max. Units IDD Supply Current 95 mA F0 Center Frequency 100 MHz Frequency Stability Note 4 50 ppm Integration Range (12kHz to 20MHz) 135 200 j Phase Noise fsRMS Integration Range (1MHz to 20MHz) 109 Tstart Start-Up Time 10 ms TR/TF Rise/Fall time 20%-80% 150 300 450 ps Duty Cycle 48 50 52 % VOH Output High Voltage HCSL output levels 660 700 850 mV VOL Output Low Voltage HCSL output levels -150 0 27 mV VOVS Max Output Including Overshoot VOH + 0.3 V VUDS Min Output Including Undershoot VOL - 0.3 V VRB Ringback Voltage 0.2 V VOX Absolute Crossing Point 250 350 550 mV Vswing Peak to Peak Output Voltage Swing 640 700 950 mV Notes: 1. Exceeding the absolute maximum ratings may damage the device. 2. The device is not guaranteed to function outside its operating ratings. 3. Guaranteed after thermal equilibrium. 4. Inclusive of initial accuracy, temperature drift, aging, shock, vibration. ClockWorks is a registered trademark of Microchip Technology Inc. Microchip Technology Inc. Microchip Technology Inc. MX555ABD100M000 Ordering Information Ordering Part Number Marking Line 1 Marking Line 3 Shipping Package MX555ABD100M000 MX555A BD1000 Tube 6-Pin 5mm x 3.2mm LGA MX555ABD100M000-TR MX555A BD1000 Tape and Reel 6-Pin 5mm x 3.2mm LGA Devices are Green and RoHS compliant. Sample material may have only a partial top mark. Pin Configuration OE VDD DNC /Q GND Q Pin Description Pin Number Pin Name Pin Type Pin Level Pin Function Output Enable, disables output to tri-state, 1 OE I, SE LVCMOS 0 = Disabled, 1 = Enabled, 50k Ohms Pull-Up (Internal) 2 DNC Make no connection, leave floating. 3 GND PWR Power Supply Ground 4, 5 Q, /Q O, Diff HCSL Clock Output Frequency = 100MHz 6 VDD PWR Power Supply Environmental Specifications Thermal Shock MIL-STD-883, Method 1011, Condition A Moisture Resistance MIL-STD-883, Method 1004 Mechanical Shock MIL-STD-883, Method 2002, Condition E Mechanical Vibration MIL-STD-883, Method 2007, Condition C Resistance to Soldering Heat J-STD-020C, Table 5-2 Pb-free devices (except 2 cycles max) Hazardous Substance Pb-Free / RoHS / Green Compliant Solderability JESD22-B102-D Method 2 (Preconditioning E) Terminal Strength MIL-STD-883, Method 2004, Test Condition D Gross Leak MIL-STD-883, Method 1014, Condition C Fine Leak MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s Solvent Resistance MIL-STD-202, Method 215 January 07, 2020 2 Revision 1.0 MX555AB1-1510 tcghelp microchip.com