OX-2201-EAE-1081-10M000 Microchip

OX-220 Oven Controlled Crystal Oscillator OX-220 Features Applications Reflow Process Compatible Base stations Surface Mount package Test equipment SC CUT Crystal Synthesizers Low Profile Compact Package (8.3mm) Military communication equipment Standard Frequencies: 10 12.8 19.2 20 26 30.72 Mhz Digital Switching Performance Specifications 1 Frequency Stabilities (SC-Cut Crystal-Option - 10 to 40 MHz) Parameter Min Typical Max Units Condition vs. operating temperature range -10 +10 ppb -20 to +70C (referenced to +25C) -10 +10 ppb -40 to +85C Initial tolerance -0.2 +0.2 ppm at time of shipment, nominal EFC vs. supply voltage change -5 +5 ppb V 5% static S vs. load change -5 +5 ppb Load 5% static vs. aging / day -0.5 +0.5 ppb 10 Mhz after 30 days of operation vs. aging / day -1 +1 ppb > 10 Mhz after 30 days of operation vs. aging / year -60 +60 ppb 10 Mhz after 30 days of operation vs. aging / year -100 +100 ppb > 10 Mhz after 30 days of operation Holdover start up time Warm-up time 5 minutes to 100ppb of final frequency (1 hour reading) +25C Page 1 of 8Performance Specifications Supply Voltage (Vs) Parameter Min Typical Max Units Condition Supply voltage (standard) 3.135 3.3 3.465 VDC 4.75 5.0 5.25 VDC 3.1 Watts during warm-up Power consumption 1.5 Watts steady state +25C RF Output Signal standard HCMOS Load 15 pF Signal Level (Vol) 0.4 VDC with Vs=3.3V and 15pF Load Signal Level (Vol) 0.5 with Vs=5.0V & 12V and 15pF Load Signal Level (Voh) 2.4 VDC with Vs=3.3V and 15pF Load Signal Level (Voh) 3.5 with Vs=5.0V & 12V and 15pF Load Duty Cycle 45 55 % (Voh-Vol)/2 Rise time 5 ns Fall time 5 ns Signal Sine Wave Load 50 Output Power 3,3V 2 5 8 dBm 50 load Output Power 5.0V 5 8 11 dBm 50 load Harmonics -30 dBm 50 load Frequency Tuning (EFC) Tuning Range Fixed OCXO No adjust 0.8 2.4 ppm with SC cut crystal Linearity 10% Tuning Slope Positive 0.0 1.4 2.8 VDC with Vs=3.3V Control Voltage Range 0.0 2.0 4.0 VDC with Vs=5.0V modulation Reference Voltage Output (Vref) Reference Voltage 2.75 2.8 2.85 VDC with Vs = 3.3 VDC 3.92 4.0 4.08 VDC with Vs = 5.0 VDC Additional Parameters -80 -70 dBc/Hz 1 Hz -110 -105 dBc/Hz 10 Hz 30.72MHz 3 Phase Noise -138 -130 dBc/Hz 100 Hz with SC -148 -140 dBc/Hz 1 kHz Cut -152 -145 dBc/Hz 10 kHz -90 -80 dBc/Hz 1 Hz -120 -110 dBc/Hz 10 Hz 20MHz 3 Phase Noise -140 -135 dBc/Hz 100 Hz with SC -148 -145 dBc/Hz 1 kHz Cut -152 -145 dBc/Hz 10 kHz Weight 10 g Processing & Packing Handling & Processing Note Page 2 of 8 Opti- 5 on