PIC24HJ32GP202/204 and PIC24HJ16GP304 16-bit Microcontrollers (up to 32 KB Flash and 2 KB SRAM) with Advanced Analog Operating Conditions Timers/Output Compare/Input Capture 3.0V to 3.6V, -40C to +150C, DC to 20 MIPS Three 16-bit timers/counters. Can pair up two to make one 32-bit. 3.0V to 3.6V, -40C to +125C, DC to 40 MIPS Two Output Capture modules configurable as timers/counters Core: 16-bit PIC24H CPU Four Input Capture modules Code-efficient (C and Assembly) architecture Peripheral Pin Select (PPS) to allow function Single-cycle mixed-sign MUL plus hardware divide remap Clock Management Communication Interfaces 2% internal oscillator One UART module (10 Mbps) Programmable PLLs and oscillator clock sources - With support for LIN 2.0 protocols and IrDA Fail-Safe Clock Monitor (FSCM) One 4-wire SPI module (15 Mbps) Independent Watchdog Timer (WDT) 2 One I C module (up to 1 Mbaud) with SMBus Fast wake-up and start-up support PPS to allow function remap Power Management Input/Output Low-power management modes (Sleep, Idle, Doze) Integrated Power-on Reset and Brown-out Reset Sink/Source up to 10 mA (pin specific) for stan- 1.35 mA/MHz dynamic current (typical) dard VOH/VOL, up to 16 mA (pin specific) for non-standard VOH1 55 A IPD current (typical) 5V-tolerant pins Advanced Analog Features Selectable open drain, pull-ups, and pull-downs Up to 5 mA overvoltage clamp current ADC module: External interrupts on all I/O pins - Configurable as 10-bit, 1.1 Msps with four S&H or 12-bit, 500 ksps with one S&H Qualification and Class B Support - Ten analog inputs on 28-pin devices and up to 13 analog inputs on 44-pin devices AEC-Q100 REVG (Grade 0 -40C to +150C) Flexible and independent ADC trigger sources Class B Safety Library, IEC 60730 Debugger Development Support In-circuit and in-application programming Two program and two complex data breakpoints IEEE 1149.2-compatible (JTAG) boundary scan Trace and run-time watch Packages Type SPDIP SOIC SSOP QFN-S QFN TQFP Pin Count 28 28 28 28 44 44 Contact Lead/Pitch .100 1.27 0.65 0.65 0.65 0.80 I/O Pins 21 21 21 21 35 35 Dimensions 1.365x.285x.135 17.9xx7.50x2.05 10.2x5.3x1.75 6x6x0.9 8x8x0.9 10x10x1 Note: All dimensions are in millimeters (mm) unless specified. 2007-2011 Microchip Technology Inc. DS70289J-page 1PIC24HJ32GP202/204 AND PIC24HJ16GP304 PIC24HJ32GP202/204 and PIC24HJ16GP304 Product Families The device names, pin counts, memory sizes and peripheral availability of each family are listed in Table 1, followed by their pinout diagrams. TABLE 1: PIC24HJ32GP202/204 AND PIC24HJ16GP304 CONTROLLER FAMILIES Remappable Peripherals Device (1) PIC24HJ32GP202 28 32 2 16 3 42 1 1 1 ADC, 121 3 SPDIP 10 ch SOIC SSOP QFN-S (1) 26 PIC24HJ32GP204 44 32 2 3 4 2 1 3 1 1 ADC, 135 QFN 13 ch TQFP (1) 26 PIC24HJ16GP304 44 16 2 3 4 2 1 3 1 1 ADC, 135 QFN 13 ch TQFP Note 1: Only two out of three timers are remappable. 2: Only two out of three interrupts are remappable. DS70289J-page 2 2007-2011 Microchip Technology Inc. Pins Program Flash Memory (Kbytes) RAM Remappable Pins 16-bit Timer Input Capture Output Compare Standard PWM UART (2) External Interrupts SPI 10/12-bit ADC 2 I C I/O Pins (Maximum) Packages