SY100EPT20VKG-TR Microchip

SY100EPT20V 3.3V/5V LVTTL/LVCMOS-to-Differential LVPECL Translator Features General Description 3.3V and 5V Power Supply Options The SY100EPT20V is a TTL/CMOS to differential PECL translator. Capable of running from a 3.3V or 5V 300 ps Typical Propagation Delay supply, the part can be used in either Differential LVPECL Output LVTTL/LVCMOS/LVPECL or TTL/CMOS/PECL 2 0 mA Maximum Supply Current systems. PNP LVTTL Input for Minimal Loading The device only requires a single positive supply of Q Output will Default High with Inputs Open 3.3V or 5V. No negative supply is required. High Bandwidth up to 850 MHz Typical The tiny 8-lead MSOP package and the low-skew, Available in 8-Lead MSOP and SOIC Packages dual-gate design of the SY100EPT20V make it ideal for those applications where space, performance, and low power are at a premium. Package Type SY100EPT20V MSOP-8 (K) or SOIC-8 (Z) (Top View) NC 1 8 VCC LVTTL Q 2 7 D /Q 3 6 NC LVPECL NC 4 5 GND 2020 Microchip Technology Inc. 1DS20006245A-page SY100EPT20V 1.0 ELECTRICAL CHARACTERISTICS Absolute Maximum Ratings Power Supply Voltage (V )..................................................................................................................... 0.5V to +7.0V CC TTL Input Voltage (V )................................................................................................................................ 0.5V to V IN CC TTL Input Current (I ) ........................................................................................................................ 30 mA to +5.0 mA IN PECL Output Current, Continuous (I ) ............................................................................................................... 50 mA OUT PECL Output Current, Surge (I )...................................................................................................................... 100 mA OUT Notice: Permanent device damage can occur if absolute maximum ratings are exceeded. This is a stress rating only and functional operation is not implied at conditions other than those detailed in the operational sections of this data sheet. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. DC ELECTRICAL CHARACTERISTICS Electrical Characteristics: V = 3.3V 10% or V = 5.0V 10% T = 40C to +85C, unless otherwise stated, CC CC A ( Note 1). Parameter Symbol Min. Typ. Max. Units Conditions Power Supply Current I 20 mA EE Note 1: Devices are designed to meet the DC specifications shown in the table above after thermal equilibration has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse airflow greater than 500 lfpm is maintained. TTL DC ELECTRICAL CHARACTERISTICS Electrical Characteristics: V = 3.3V 10% or V = 5.0V 10% T = 40C to +85C, unless otherwise stated, CC CC A (Note 1). Parameter Symbol Min. Typ. Max. Units Condition Input High Voltage V 2.0 V IH Input Low Voltage V 0.8 V IL 20 V = 2.7V IN Input High Current I A IH 100 V = V IN CC Input Low Current I 0.2 mA V = 0.5V IL IN Input Clamp Voltage V 1.2 V I = 18 mA IK IN Note 1: Devices are designed to meet the DC specifications shown in the table above after thermal equilibration has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse airflow greater than 500 lfpm is maintained. PECL DC ELECTRICAL CHARACTERISTICS Electrical Characteristics: V = 3.3V 10% or V = 5.0V 10% T = 40C to +85C, unless otherwise stated, CC CC A (Note 1) Parameter Symbol Min. Typ. Max. Units Condition V 1.085 V 1.005 V 0.88 T = 40C Output High Voltage CC CC CC A V V OH (Note 2) V 1.025 V 0.955 V 0.88 T = 0C to +85C CC CC CC A V 1.830 V 1.695 V 1.555 T = 40C Output Low Voltage CC CC CC A V V OL ( Note 2) V 1.810 V 1.705 V 1.620 T = 0C to +85C CC CC CC A Note 1: Devices are designed to meet the DC specifications shown in the table above after thermal equilibration has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse airflow greater than 500 lfpm is maintained. 2: Outputs are terminated through a 50 resistor to V 2.0V. CC 2DS20006245A-page 2020 Microchip Technology Inc.