SY10ELT22ZG Microchip

SY100ELT22 Dual TTL-to-Differential PECL Translator Features General Description 300 ps Typical Propagation Delay The SY100ELT22 is a dual TTL-to-differential PECL translator. Because positive ECL (PECL) levels are <100 ps Output-to-Output Skew used, only +5V and ground is required. The small Differential PECL Outputs outline 8-lead SOIC package and the low-skew, PNP TTL Inputs for Minimal Loading dual-gate design of the SY100ELT22 makes it ideal for Flow-Through Pinouts applications that require the translation of a clock and Available in 8-Lead SOIC Package a data signal. The SY100ELT22 is compatible with positive ECL 100K logic levels. Package Type SY100ELT22 8-Lead SOIC Q0 1 8 VCC /Q0 2 7 D0 PECL TTL Q1 3 6 D1 /Q1 4 5 GND 2018 Microchip Technology Inc. DS20005996A-page 1SY100ELT22 1.0 ELECTRICAL CHARACTERISTICS Absolute Maximum Ratings Power Supply Voltage (V ) ..................................................................................................................... 0.5V to +7.0V CC TTL Input Voltage (V ) .................................................................................................................................. 0.5V to V I CC PECL Output Current, Continuous (I )................................................................................................................50 mA OUT PECL Output Current, Surge (I ) ......................................................................................................................100 mA OUT Notice: Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only and functional operation of the device at those or any other conditions above those indicated in the operational sections of this specification is not intended. Exposure to maximum rating conditions for extended periods may affect device reliability. TABLE 1-1: DC ELECTRICAL CHARACTERISTICS Electrical Characteristics: V = 4.2V to 5.5V T = 40C to +85C, unless noted. CC A Parameter Symbol Min. Typ. Max. Units Conditions Power Supply Current I 30 mA CC TABLE 1-2: TTL DC ELECTRICAL CHARACTERISTICS Electrical Characteristics: V = 4.2V to 5.5V T = 40C to +85C, unless noted. CC A Parameter Symbol Min. Typ. Max. Units Conditions Input High Voltage V 2.0 V IH Input Low Voltage V 0.8 V IL 20 V = 2.7V IN Input High Current I A IH 100 V = V IN CC Input Low Current I 0.2 mA V = 0.5V IL IN Input Clamp Voltage V 1.2 V I = 18 mA IK IN TABLE 1-3: PECL DC ELECTRICAL CHARACTERISTICS Electrical Characteristics: V = 4.2V to 5.5V T = 40C to +85C, unless noted. CC A Parameter Symbol Min. Typ. Max. Units Conditions T = 40C Values for V = 5V A CC 3915 4120 Level specifications will vary 1:1 with V . CC Output High Voltage V mV OH T = 0C to +85C Values for V A CC 3975 4120 = 5V Level specifications will vary 1:1 with V . CC T = 40C Values for V = 5V A CC 3170 3445 Level specifications will vary 1:1 with V . CC Output Low Voltage V mV OL T = 0C to +85C Values for V A CC 3190 3380 = 5V Level specifications will vary 1:1 with V . CC DS20005996A-page 2 2018 Microchip Technology Inc.