TC426IJA Microchip

TC426/TC427/TC428 1.5A Dual High-Speed Power MOSFET Drivers Features: Package Type 8-Pin PDIP/SOIC/CERDIP High-Speed Switching (C = 1000 pF): 30 nsec L High Peak Output Current: 1.5A NC 1 8 NC High Output Voltage Swing: IN A 2 7 OUT A 2, 4 7, 5 -V -25 mV GND 3 TC426 6 V DD DD Inverting IN B 4 5 OUT B - GND +25 mV Low Input Current (Logic 0 or 1): 1 A NC 1 8 NC TTL/CMOS Input Compatible IN A 2 7 OUT A 2, 4 7, 5 Available in Inverting and Noninverting GND 3 TC427 6 V DD Noninverting Configurations IN B 4 5 OUT B Wide Operating Supply Voltage: NC 1 8 NC 2 7 - 4.5V to 18V IN A 2 7 OUT A Current Consumption: GND 3 TC428 6 V DD 4 5 IN B 4 5 OUT B - Inputs Low 0.4 mA Complementary - Inputs High 8 mA NC = No internal connection Single Supply Operation Low Output Impedance: 6 General Description: Pinout Equivalent of DS0026 and MMH0026 The TC426/TC427/TC428 are dual CMOS high-speed Latch-Up Resistant: Withstands > 500 mA drivers. A TTL/CMOS input voltage level is translated Reverse Current into a rail-to-rail output voltage level swing. The CMOS ESD Protected: 2 kV output is within 25 mV of ground or positive supply. The low-impedance, high-current driver outputs swing Applications: a 1000 pF load 18V in 30 nsec. The unique current and Switch Mode Power Supplies voltage drive qualities make the TC426/TC427/TC428 ideal power MOSFET drivers, line drivers, and DC-to- Pulse Transformer Drive DC converter building blocks. Clock Line Driver Coax Cable Driver Input logic signals may equal the power supply voltage. Input current is a low 1 A, making direct interface toCMOS/bipolar switch-mode power supply control Device Selection Table ICs possible, as well as open-collector analog Part Temp. Package Configuration comparators. Number Range Quiescent power supply current is 8 mA maximum. The TC426COA 8-Pin SOIC Inverting 0C to +70C TC426CPA 8-Pin PDIP Inverting 0C to +70C TC426 requires 1/5 the current of the pin-compatible TC426EOA 8-Pin SOIC Inverting -40C to +85C bipolar DS0026 device. This is important in DC-to-DC TC426EPA 8-Pin PDIP Inverting -40C to +85C converter applications with power efficiency constraints TC426IJA 8-Pin CERDIP Inverting -25C to +85C TC426MJA 8-Pin CERDIP Inverting -55C to +125C and high-frequency switch-mode power supply TC427COA 8-Pin SOIC Noninverting 0C to +70C applications. Quiescent current is typically 6 mA when TC427CPA 8-Pin PDIP Noninverting 0C to +70C driving a 1000 pF load 18V at 100 kHz. TC427EOA 8-Pin SOIC Noninverting -40C to +85C TC427EPA 8-Pin PDIP Noninverting -40C to +85C The inverting TC426 driver is pin-compatible with the TC427IJA 8-Pin CERDIP Noninverting -25C to +85C bipolar DS0026 and MMH0026 devices. The TC427 is TC427MJA 8-Pin CERDIP Noninverting -55C to +125C noninverting the TC428 contains an inverting and non- TC428COA 8-Pin SOIC Complementary 0C to +70C TC428CPA 8-Pin PDIP Complementary 0C to +70C inverting driver. TC428EOA 8-Pin SOIC Complementary -40C to +85C Other pin compatible driver families are the TC1426/ TC428EPA 8-Pin PDIP Complementary -40C to +85C TC428IJA 8-Pin CERDIP Complementary -25C to +85C TC1427/TC1428, TC4426/TC4427/TC4428 and TC428MJA 8-Pin CERDIP Complementary -55C to +125C TC4426A/TC4427A/TC4428A. 2002-2012 Microchip Technology Inc. DS21415D-page 1TC426/TC427/TC428 Functional Block Diagram + V TC426 TC427 500 A TC428 2.5 A Noninverting Inverting Output Output (TC427) (TC426) Input GND NOTE: TC428 has one inverting and one noninverting driver. Ground any unused driver input. DS21415D-page 2 2002-2012 Microchip Technology Inc.