TC54 Voltage Detector Features: General Description: 2.0% Detection Thresholds The TC54 series are CMOS voltage detectors espe- cially well-suited for battery-powered applications Small Packages: 3-Pin SOT-23A, SOT-89, and because of their extremely low 1 A operating current TO-92 and small surface-mount packaging. Each part is laser- Low Current Drain: 1 A, typical trimmed to the desired threshold voltage, which can be Wide Detection Range: 1.1V to 6.0V specified from 1.4V to 6.0V with a 2% tolerance. Wide Operating Voltage Range: 0.7V to 10V The TC54 is available with either an open-drain or com- plementary output stage. During operation, the output Applications: (V ) remains in the logic-high state as long as V is OUT IN greater than the specified threshold voltage (V ). Battery Voltage Monitoring DET When V falls below V , the output is driven to a IN DET Microprocessor Reset logic-low. V remains low until V rises above OUT IN System Brown-Out Protection V by an amount V , when it resets to a logic- DET HYST Switching Circuit in Battery Backup high state. Level Discriminator Package Types Functional Block Diagram 3-Pin SOT-23A 3-Pin SOT-89 V IN TC54VC only V IN 3 V IN TC54 TC54 V OUT 12 1 2 3 V V V V V OUT SS OUT IN SS + 3-Pin TO-92 V REF V 12 3 SS TC54VN has open-drain output. TC54VC has complementary (push-pull) output. V V V OUT IN SS Note: 3-Pin SOT-23A is equivalent to the EIAJ SC-59. Device Features Output (1) Device Reset Delay Std. Trip Points (typical) Type State TC54VN Open-Drain Active Low No 1.4V, 2.1V, 2.7V, 2.9V TC54VC Push-Pull Active Low No 3.0V, 4.2V, 4.3V Note 1: Custom Trip Points available. Minimum order requirement. Information available upon request. 2001-2014 Microchip Technology Inc. DS20001434K-page 1TC54 Notice: Stresses above those listed underAbsolute Maxi- 1.0 ELECTRICAL mum Rating may cause permanent damage to the device. CHARACTERISTICS These are stress ratings only and functional operation of the device at these or any other conditions above those indicated Absolute Maximum Ratings in the operation sections of the specifications is not implied. Input Voltage ...................................................................+12V Exposure to Absolute Maximum Rating conditions for extended periods may affect device reliability. Output Current ..............................................................50 mA Output Voltage: CMOS................(V 0.3V) to (V + 0.3V) SS IN Open-Drain.....................(V 0.3V) to 12V SS Power Dissipation (T 70C): A 3-Pin SOT-23A .......................................................240 mW 3-Pin SOT-89..........................................................500 mW 3-Pin TO-92 ............................................................300 mW Operating Temperature Range........................-40C to +85C Storage Temperature Range.........................-65C to +150C DC CHARACTERISTICS Electrical Specifications: Unless otherwise noted, T = +25C. A Parameter Symbol Min. Typ. Max. Units Test Conditions Operating Voltage V 0.7 10.0 V (V ) 1.6V IN DET ) < 1.6V 0.7 6.0 V (V DET Quiescent Current I 0.8 2.7 AV = 2.0V SS IN 0.9 3.0 V = 3.0V IN 1.0 3.2 V = 4.0V IN 1.1 3.6 V = 5.0V IN Threshold Voltage V 1.37 1.4 1.43 V TC54VX14 DET (Note 1) 2.06 2.1 2.14 TC54VX21 2.65 2.7 2.75 TC54VX27 2.84 2.9 2.96 TC54VX29 2.94 3.0 3.06 TC54VX30 4.12 4.2 4.28 TC54VX42 4.21 4.3 4.39 TC54VX43 N.M-2% N.M N.M+2% TC54VXNM (Note 2) Hysteresis Voltage V 28 70 112 mV V = 1.4V (typical) HYST DET 42 105 168 V = 2.1V (typical) DET 54 135 216 V = 2.7V (typical) DET 58 145 232 V = 2.9V (typical) DET 60 150 240 V = 3.0V (typical) DET 84 210 336 V = 4.2V (typical) DET 86 215 344 V = 4.3V (typical) DET Q-60% Q Q+60% V = (20*Q)V (typical) (Note 2) DET Output Current I 3.0 7.7 mA V = 0.5V, V = 2.0V OUT OL IN 5.0 10.1 V = 0.5V, V = 3.0V OL IN 6.0 11.5 V = 0.5V, V = 4.0V OL IN 7.0 13.0 V = 0.5V, V = 5.0V OL IN -10.0 -2.0 TC54VC Only: V = V 2.1V, V = 8.0V OH IN IN Tempco of (V )T (V ) 100 ppm/C -40C T 85C DET C DET A Delay Time t 0.2 msV V inversion DLY DET OUT Note 1: For other voltage options, please contact your regional Microchip sales office. 2: Represents all other custom Threshold Voltage options. DS20001434K-page 2 2001-2014 Microchip Technology Inc.