USB3316 Hi-Speed USB Transceiver with 1.8V ULPI Interface - 19.2MHz Reference Clock Datasheet PRODUCT FEATURES USB-IF Hi-Speed compliant to the Universal Serial Carkit UART mode for non-USB serial data transfers Bus Specification Rev 2.0 Integrated USB Switch Interface compliant with the ULPI Specification Allows single USB port of connection High speed data revision 1.1 as a Single Data Rate (SDR) PHY Battery charging 1.8V IO Voltage (10%) Stereo and mono/mic audio flexPWR Technology USB1.1 data Low current design ideal for battery powered Industrial Operating Temperature -40C to +85C applications Packaging Options Sleep mode tri-states all ULPI pins and places the 24 pin QFN lead-free RoHS compliant package part in a low current state (4 x 4 x 0.90 mm height) Supports FS pre-amble for FS hubs with a LS device 25 ball VFBGA lead-free RoHS compliant package also attached (UTMI+ Level 3) available (3 x 3 x 0.88mm height) Supports HS SOF and LS keep-alive pulse 25 ball UFBGA lead-free RoHS compliant package also available (3 x 3 x 0.61mm height) Includes full support for the optional On-The-Go (OTG) protocol detailed in the On-The-Go Applications Supplement Revision 2.0 specification Supports the OTG Host Negotiation Protocol (HNP) The USB3316 is targeted for any application where a Hi- and Session Request Protocol (SRP) Speed USB connection is desired and when board Allows host to turn VBUS off to conserve battery space, power, and interface pins must be minimized. power in OTG applications The USB3316 is well suited for: Support OTG monitoring of VBUS levels with internal Cell Phones comparators PDAs Wrapper-less design for optimal timing performance MP3 Players and design ease Low Latency Hi-Speed Receiver (43 Hi-Speed clocks GPS Personal Navigation Max) allows use of legacy UTMI Links with a ULPI Scanners bridge External Hard Drives Internal 5V cable short-circuit protection of ID, DP Digital Still and Video Cameras and DM lines to VBUS or ground Portable Media Players 19.2MHz Reference Clock Operation Entertainment Devices 0 to 3.6V input drive tolerant Able to accept noisy clock sources Printers Internal low jitter PLL for 480MHz Hi-Speed USB Set Top Boxes operation Video Record/Playback Systems Internal detection of the value of resistance to ground IP and Video Phones on the ID pin Gaming Consoles Integrated battery to 3.3V LDO regulator POS Terminals 2.2uF bypass capacitor 100mV dropout voltage Integrated ESD protection circuits Up to 15kV without any external devices SMSC USB3316 REV C DATASHEET Revision 2.1 (06-10-10) Hi-Speed USB Transceiver with 1.8V ULPI Interface - 19.2MHz Reference Clock Datasheet Order Number(s): USB3316C-CP-TR FOR 24 PIN, QFN LEAD-FREE ROHS COMPLIANT PACKAGE (TAPE AND REEL) USB3316C-GJ-TR FOR 25 PIN, VFBGA LEAD-FREE ROHS COMPLIANT PACKAGE (TAPE AND REEL) USB3316C-GM-TR FOR 25 PIN, UFBGA LEAD-FREE ROHS COMPLIANT PACKAGE (TAPE AND REEL) REEL SIZE IS 4000 PIECES. This product meets the halogen maximum concentration values per IEC61249-2-21 For RoHS compliance and environmental information, please visit www.smsc.com/rohs 80 ARKAY DRIVE, HAUPPAUGE, NY 11788 (631) 435-6000, FAX (631) 273-3123 Copyright 2010 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC s standard Terms of Sale Agreement dated before the date of your order (theTerms of Sale Agreemen). The product may contain design defects or errors known as anomalies which may cause the product s functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSCs website at