USB333x Industrys Smallest Hi-Speed USB Transceiver with Single Supply Operation Data Brief PRODUCT FEATURES USB-IF Battery Charging 1.1 Specification Compliant External Reference Clock operation available ULPI Clock In Mode (60MHz sourced by Link) Link Power Management (LPM) Compliant 0 to 3.6V input drive tolerant Integrated ESD protection circuits Able to accept noisy clock sources as reference Up to 25kV IEC Air Discharge without external to internal, low-jitter PLL devices USB3330 and USB3333 support multiple Over-Voltage Protection circuit (OVP) protects the frequencies VBUS pin from continuous DC voltages up to 30V Smart detection circuits allow identification of USB Integrated USB Switch (USB3331, USB3336 and charger, headset, or data cable insertion USB3338) Includes full support for the optional On-The-Go No degradation of Hi-Speed electrical (OTG) protocol detailed in the On-The-Go characteristics Supplement Revision 2.0 specification Allows single USB port of connection by providing Supports the OTG Host Negotiation Protocol (HNP) switching function for: and Session Request Protocol (SRP) Battery charging UART mode for non-USB serial data transfers Stereo and mono/mic audio USB Full-Speed/Low-Speed data Internal 5V cable short-circuit protection of ID, DP SMSC RapidCharge Anywhere Provides: and DM lines to VBUS or ground 3-times the charging current through a USB port Industrial Operating Temperature -40 C to +85C over traditional solutions 25 ball, WLCSP lead-free RoHS Compliant package USB-IF Battery Charging 1.1 compliance to any (1.97 x 1.97 x 0.53 mm height) portable device Charging current up to 1.5Amps via compatible Applications USB host or dedicated charger Dedicated Charging Port (DCP), Charging (CDP) & The USB333x is the solution of choice for any Standard (SDP) Downstream Port support application where a Hi-Speed USB connection is desired flexPWR Technology and when board space, power, and interface pins must Extremely low current design ideal for battery be minimized. powered applications Cell Phones Sleep mode tri-states all ULPI pins and places the PDAs part in a low current state MP3 Players 1.8V to 3.3V IO Voltage (USB3333) GPS Personal Navigation Single Power Supply Operation Integrated 1.8V regulator Scanners Integrated battery to 3.3V regulator External Hard Drives 100mV dropout voltage Digital Still and Video Cameras PHYBoost Portable Media Players Programmable USB transceiver drive strength for Entertainment Devices recovering signal integrity TM Printers VariSense Set Top Boxes Programmable USB receiver sensitivity Wrapper-less design for optimal timing performance Video Record/Playback Systems and design ease IP and Video Phones Low Latency Hi-Speed Receiver (43 Hi-Speed Gaming Consoles clocks Max) allows use of legacy UTMI Links with a ULPI bridge SMSC USB333x Revision 1.3 (11-20-12) PRODUCT PREVIEWIndustrys Smallest Hi-Speed USB Transceiver with Single Supply Operation Order Number(s): REFCLK FREQUENCY ORDER NUMBER (Note 0.1) PACKAGE TYPE REEL SIZE USB3330E-GL-TR Selectable USB3331E-GL-TR 26MHz 25 Ball, WLCSP Lead-Free RoHS USB3333E-GL-TR Selectable 3,000 pieces Compliant Package (tape and reel) USB3336E-GL-TR 19.2MHz USB3338E-GL-TR 38.4MHz Note 0.1 All versions support ULPI Clock Input Mode (60MHz input at REFCLK) This product meets the halogen maximum concentration values per IEC61249-2-21 For RoHS compliance and environmental information, please visit www.smsc.com/rohs Copyright 2012 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC s standard Terms of Sale Agreement dated before the date of your order (theTerms of Sale Agreemen). The product may contain design defects or errors known as anomalies which may cause the product s functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSCs website at