USB5533B 3-Port SS/HS USB Hub Controller Emulates portable/handheld native wall chargers General Description - Charging profiles emulate a handheld The USB5533B hub is a 3-port SuperSpeed/Hi-Speed, devices wall charger to enable fast charging low-power, configurable hub controller family fully com- (minutes vs. hours) pliant with the USB 3.0 Specification. The USB5533B Enables charging from a mobile platform that is supports 5Gbps SuperSpeed (SS), 480Mbps Hi- off Speed (HS), 12 Mbps Full-Speed (FS) and 1.5 Mbps Support tablets high current requirements Low-Speed (LS) USB signaling for complete coverage of all defined USB operating speeds. Optimized for low-power operation and low ther- mal dissipation The USB5533B supports USB 2.0 speeds through its Vendor Specific Messaging (VSM) support for USB 2.0 hub controller. The new SuperSpeed hub con- firmware upload over USB troller operates in parallel with the USB 2.0 controller, so the 5Gbps SuperSpeed data transfers are not Configuration via OTP ROM, SPI ROM, or SMBus affected by the slower USB 2.0 traffic. On-chip 8051 C manages VBUS, and other hub signals The USB5533B supports battery charging on a per port basis. On battery charging enabled ports, the devices 8 KB RAM, 32 KB ROM provide automatic USB data line handshaking. The One Time programmable (OTP) ROM: 8 kbit handshaking supports USB 1.2 Charging Downstream - Includes on-chip charge pump Port (CDP), Dedicated Charging Port (DCP) and non- Single 25 MHz XTAL or clock input for all on-chip USB 1.2 devices. PLL and clocking requirements The USB5533B is configured for operation through Supports JTAG boundary scan internal default settings, where custom configurations PHYBoost (USB 2.0) are supported through an on-chip OTP ROM, an exter- - Selectable drive strength for improved signal nal SPI ROM, or SMBus. integrity VariSense (USB 2.0) Product Features - controls the receiver sensitivity enabling four USB 3.0 compliant 5 Gbps, 480 Mbps, 12 Mbps programmable levels of USB signal receive and 1.5 Mbps operation, USB pins are 5 V toler- sensitivity ant IETF RFC 4122 compliant 128-bit UUID - Integrated termination and pull-up/pull-down resistors Software Features Three downstream USB 3.0 ports Compatible with Microsoft Windows 7, Vista, XP, Supports battery charging of most popular battery Mac OSX10.4+, and Linux Hub Drivers powered devices - USB-IF Battery Charging rev. 1.2 support (DCP & CDP) - Apple Portable product charger emulation - Blackberry charger emulation - Chinese YD/T 1591-2006 charger emulation - Chinese YD/T 1591-2009 charger emulation - Supports additional portable devices 2012 - 2014 Microchip Technology Inc. DS00001680B-page 1USB5533B TO OUR VALUED CUSTOMERS It is our intention to provide our valued customers with the best documentation possible to ensure successful use of your Microchip products. To this end, we will continue to improve our publications to better suit your needs. Our publications will be refined and enhanced as new volumes and updates are introduced. If you have any questions or comments regarding this publication, please contact the Marketing Communications Department via E-mail at docerrors microchip.com. We welcome your feedback. Most Current Data Sheet To obtain the most up-to-date version of this data sheet, please register at our Worldwide Web site at: